道路就地冷再机设计.docVIP

本科学生毕业设计 道路就地冷再生机整机设计 系部名称： 机电工程系 专业班级： 机械设计制造及其自动化06-2 学生姓名： 张智伟 指导教师： 周 威 职 称： 讲 师 黑 龙 江 工 程 学 院 二○一○年六月 The Graduation Design for Bachelors Degree Regeneration of local roads cold mechanical design Candidate：Specialty：Material Processing and Control EngineeringClass：Supervisor：Associate Prof. Heilongjiang Institute of Technology 2010-06·Harbin  摘 要 关键词： ABSTRACT Crank Press is a fundamental equipment, which makes a mould，is extensively applied in the production of industry. The crank press which was designed is mainly used for molding which be unable to bear a heavy pressure，then starting the engine of crank press to complete the bend forming process when after the crank press fixed. The working mechanism is supported by the linkage of crank which is changed the motor spinning activity into moving straight line (back and forth) through by crank, linkage and slider. The process of die spotting is causing by upper die which is shifted by slider. When the crank spines one time, the slider returns (back and forth) once, then finished one product. This design is mainly attend to measure and design the organization of mould; the choosing of pressure machine and electric motor; the design and meas