带式输送机毕业设计论文详细分解.doc

摘 要 带式输送机的机械设计程序分两步，第一步是初步设计，主要是通过理论上的计算选出合适的输送机部件。其中包括输送带的类型和带宽选择、带式输送机线路初步设计、托辊及其间距的选择、滚筒的选择、电动机、减速器、推杆制动器、液粘软起动的选择等；第二步是施工设计，主要根据初步设计选定的滚筒、托辊、驱动装置完成对已选部件的安装与布置图纸设计工作。 最后，在机械设计的基础上，完成了对输送机的保护装置及其电气原理设计。电气控制主要通过可编程控制器实现（PLC）。 关键词：带式输送机；驱动装置；可编程控制器 Abstract Belt conveyor transmission capacity is one of the largest continuous transporting machine . Its structure is simple、 smooth operation 、 reliable functioning, and low consumption, little pollution, easy centralized control and automation And the continuous transportation of the facilities can be achieved in successive loading. The paper is mainly about the mechanical design and electrical principles belt conveyor design. There are two steps of designing the belt conveyor machinery. the first step is the preliminary design, mainly through theoretical calculations elected suitable carriers components. Including travel and the type of bandwidth selection, preliminary design belt conveyor lines, roll up their space options, roller choice, electric motors, reducer, push rod brakes, hydraulic soft start option; The second step is the construction design, based primarily on the preliminary design selected roller, roll up, driven devices have completed the installation of the components of the design and layout drawings. Finally, in the mechanical design basis for carriers I complete the design principles of the protection devices and appliances. the control of electrical equipment can be achieved primarily through programmable controller (PLC)。 Keywords： belt conveyor,；drive devices； programmable controller 目录 1 绪论 1 1.1常用带式输送机类型与特点 2 1.2 国内外带式输送机的发展与现状 3 1.3 PLC简介 8 1.4 本课题的研究目的及选题背景 12 2 带式输送机初步设计 13 2.1 选择机型 13 2.2 输送带选择计算 13 2.3 输送线路的初步设计 17 2.4 托辊的选择计算 18 2.5 带式输送机线路阻力计算 20 2.6 输送带的张力计算 22 2.7 输送带强度验算 26 2.8 牵引力及电动机功率的计算 26 2.9 驱动装置及其布置 27 2.10 拉紧力、拉紧行程的计算及拉紧装置的选择 29 2.11 制动力矩的计算及制动器的选择 33 2.12 减速器与联轴器的选型 34 2.13 软启动装置的选择 35 2.14 辅助装置 36 2.15设计结论表 36 3 带式输送机电控系统设计 39 3.1 电控系统的概述