华中科技大学土木工程毕业设计计算书分析.docx

华 中 科 技 大 学 毕 业 设 计 论 文 PAGE \* MERGEFORMATVI -摘要 在大学四年的学习生涯行将结束的时候，我拿到了这份设计任务书和相关数据资料，怀着期盼渴望的心情，开始了工作。 本计算书是针对华中科技大学土木工程专业xxx级毕业设计：教学楼为五层现浇钢筋混凝土框架结构。长51.5m，宽25m，高27m。 在“建筑设计”部分中，经过层层考虑选择最终方案，针对最终建筑方案，确定了其具体建筑构造、做法与材料。 在“结构设计”部分中，首先按照要求选择一榀框架为本次手算的任务，明确其计算简图与各个计算参数；然后根据建筑做法确定其所受荷载，计算梁、柱、板与基础的内力；最后分别进行各构件的配筋计算。 在“结构设计”部分中，穿插进行“PKPM”电算，以保证计算成果的可靠性。并达到同手算成果对比、分析的目的。 关键词：毕业设计，多层厂房，框架，抗震设计，电算 Abstract I got the mission book and other datas when my campus time would go by, and with a good and hopeful feeling, I have started my work. The calculation report is written for the graduation design whose name is “XinHua Middle School Building”. The building is reinforcement concrete structure with five stories The length of the building is 58.5m, the width is 18m and the height is 21.45m. In the process of “Architecture Design”, I determine the detailed conformation and the material of the building. In the process of “Structure Design”, firstly, I determined to by hand and determined the sketch and the parameters of the frame. Secondly, I determined the loads on the frame and calculated the internal forces of the beams, second beam, the planes, the columns and the foundations. Lastly, how much reinforcement is necessary can be determined. In the process of the graduation design, I made use of the computer program named “PKPM” to auditing and analysis my result which was calculated by hand. Keywords： Graduation design, School Building, Fames Anti-seismic Design, Earthquake Function. 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc390120281 -摘要  PAGEREF _Toc390120281 \h I  HYPERLINK \l _Toc390120282 Abstract  PAGEREF _Toc390120282 \h II  HYPERLINK \l _Toc390120283 目录  PAGEREF _Toc390120283 \h III  HYPERLINK \l _Toc390120284 1、工程概况与建筑设计  PAGEREF _Toc390120284 \h 7  HYPERLINK \l _Toc390120285 1.1工程概况  PAGEREF _Toc390120285 \h 7  HYPERLINK \l _Toc390120286 1.2建筑设计  PAGEREF _Toc390120286 \h 8  HYPERLINK \l _Toc390120287 1.2.