船用防锈漆生产工艺流程图200871145624e3ykc5n0B7C.docVIP

1.1 船用防锈漆生产工艺流程图 The flow chart for the manufacturing process of anticorrosive marine paint 树脂resin, 防锈颜料antirust paint, 调速分散机speed regulation disperser, 混合均匀mixed well, 砂磨机sand mill, 研磨triturate, 测细度 measure the fineness of grind , 调速分散机speed regulation disperser, 助剂additives, 溶剂impregnant , 分散disperse , 调黏，测黏度attemper and test the viscosity, 防结皮剂anti-skinning agent, 分散disperse, 取样sampling, 质量检测quality testing, 检测合格qualified, 过滤包装filtrate and pack 1.2 试验方法 1.2 Testing technique1.2.1 取样 Sampling产品取样按 GB/T 3186-82《涂料产品的取样》进行，样品分为两份，一份作为检测样品，一份作为备用样品。 Sanmpling acroding to the GB/T 3186-82 Sampling Paint Products ,and divides into two,one for testing, the other for spare use1.2.2 黏度Viscosity按GB/T 1723-93 〈〈涂料黏度测定法〉〉进行，采用乙法：涂-4黏度法进行。Test according to the GB/T 1723-93 Determination of Viscosity of Coatings, and adopt the second way: viscosity (Mr -4)1.2.3 细度Fineness按GB/T 1724-79〈〈涂料细度测定法〉〉进行 Test according to GB/T 1724-79 Methods of Test for Fineness of Grind of Paints1.2.4 附着力Adhesion按GB/T 1720-79〈〈涂膜附着力测定法〉〉进行Test according to GB/T1720-79 Determination of Adhesion of Film1.2.5 固体含量Solid content按GB/T 1725-79 〈〈涂料固体含量测定法〉〉进行Test according to GB/T 1725-79 Methods of Test For Non-volatile Matter of Varnishes, Paints And Their Vehicles1.2.6 干燥时间Drying time按GB/T 1728-79〈〈漆膜、腻子干燥时间测定法〉〉进行，其中表面干燥时间采用乙法：指触法进行，实际干燥时间采用丙法：刀片法。Test according to GB/T 1728-79Methods of Test For Drying Time of Coatings of Paints And Putties, adopt the second way to test the drying time of the surface by touching it. And the actual drying time please adopt the third way by using knives1.2.7 漆膜颜色及外观Color and appearance of films按GB/T1729-79〈〈漆膜颜色及外观测定法〉〉进行Test according to GB/T 1729-79 Determination of Color and Appearance of Films.1.2.8 柔韧性Flexibility按GB/T 1731-93〈〈漆膜柔韧性测定法〉〉进行Test according to GB/T 1731-93 Determination of Flexibility of Films1.2.9 耐冲击性Impact resistance按GB/T 1732-93〈〈漆膜耐冲击性测定法〉〉进行Test according to GB/T 1732-93 Determination of Impact Resistance of Films1.2.10硬度