焚烧装置设备吊装方案1.docVIP

1、概述 General 1工程概述 General of the work 焚烧装置位于5#路与W1管廊交汇点的北侧，该装置为钢结构框架，与W1管廊形成高14.7米,南北方向长11.9米,东西方向10.7米的联合钢结构,位于B15柱西侧的V4560排气筒,B15/B30之间的C4550焚烧炉,B30/B50,A40/W1-B之间的F4510,F4520水洗塔成为本装置设备安装的重中之重,特此编写此方案. The incinerator unit lies on the north side of the cross point of the road 5# and the pipe racks W1. The unit is a steel frame, and it constitutes a unite steel structure, which is 14.7 meters high, 11.9 meters long from south to north and 10.7 meters long from east to west, together with the pipe racks W1. The exhaust mast V4560 which lies on the west side of the column B15, the incinerator C4550 which lies between B15 and B30, the water scrubber F4510 between B30 and B50 and F4520 between A40 and W1-B are the key points of the erection of the incinerator unit. Then we compiled this scheme. 设备参数一览表 List of the parameters of equipment 序号No. 名称Description 位号 Tag No. 重量 Weight 规格 Specification 1 排气筒 Exhaust mast V4560 7 φ860*29800 2 焚烧炉 Incinerator C4550 5 φ3000*12550 3 水洗塔 Water scrubber F4510 8.94 φ2800*7955 4 水洗塔 Water scrubber F4520 0.75 5 水洗塔 Water scrubber V4530 2.05 6 风机Fan K4550 2.3 7 风机Fan K4525 0.7 8 泵站 Pump plant P4553/P4552 9 泵站 Pump Plant P4533/P4532 10 泵 Pump APC 2.编制说明 Base for compiling 2.1 TPT提供的设备平面布置图 The equipment layout plan supplied by TPT 2.2 TPT提供的设备本体图. Equipment drawings supplied by TPT 2.3设备到货清单. Lists about the delivery of equipment 2.4 TPT提供的焚烧区的钢结构与基础布置图. The layout plan about steel structures and foundations in incinerator plant area supplied by TPT 2.5 50吨汽车吊车性能表 The performance table about the crane of 50T 2.6实用起重吊装手册上海科学技术出版社 “Practical manual for lifting” issued by Science and Technology Publishing House in Shanghai 2.7《化工工程建设起重施工规范》HGJ201－83； “Code of lifting work in chemical engineering construction” HGJ201-83 2.8《炼油、化工施工安全规程》SH3505－99； “Safety rules for oil refining and chemical engineering construction” SH3505-99 2、施工前的准备工作及具备条件 Preparation and conditions before construction 2.1施工图纸已经全面会审，并进行了设计交底