基于nRF24L01的无线温湿度检测系统设计说课.doc

浙江万里学院 本科毕业设计(论文) (2014届) 论文题目基于nRF24L01无线温湿度检测系统设计(英文) Design of Wireless Temperature and Humidity Detection System Based on nRF24L01 所在学院 电子信息学院 专业班级 电气101班 学生姓名 陈树源 学号 2010013827指导教师 郑子含 职称 副教授 完成日期 2014 年 4 月 20 日 基于nRF24L01的无线温湿度 检测系统设计 陈树源 （浙江万里学院电信学院电气101班） 2014年4月 摘 要 温湿度是一个非常重要的参数。在工业、医疗、军事和生活等许多地方，都需要用到检测装置来测量温湿度。随着现代社会的告诉发展，传统直接布线测量方式已无法再满足现状，特别是在某些环境恶劣的工业环境和户外环境，通过直接布线测量显得苍白而无力，因此无线温湿度检测技术应运而生。 DS12C887，显示模块采用液晶LCD1602。单片机通过时钟模块获取时间数据，对数据进行处理；温湿度传感器采集温湿度信号送给单片机处理；单片机通过无线模块再把时间数据和温湿度数据发送到PC端，在显示模块上显示数据。整个系统实现了实时监控环境温湿度的功能。 关键词：温湿度；STC89C51；SHT11；nRF24L01 Abstract Temperature and humidity is an important parameter. In many parts of the industrial, medical, military and other life, you need to use the detector to measure the temperature and humidity. With the development of modern society tells traditional direct measurement wiring can no longer meet the status, especially in some harsh industrial environments and outdoor environment, through direct measurement wiring looked pale and weak. Therefore, wireless temperature and humidity detection technology came into being. Primarily by the design control module, wireless transmission module, temperature and humidity monitoring system, display module, time module, power modules and other components. And through various types of modules for comparison and selection, pick more suitable for the design of the module. Master module using SCM STC89C51, temperature and humidity module using SHT11 temperature and humidity sensors, wireless transmission module using nRF24L01, clock chip DS12C887, using liquid crystal display module LCD1602. SCM data obtained through time clock module, for data processing; temperature and humidity sensors collect temperature and humidity signal to the microcontroller processing; microcontroller through a wireless module and then the temperature and humidity data and time data is sent to the PC side, the data displayed on the display module. The fun