JW5005HHandheldVideoMicroscope放大镜手册-英文-revB.docVIP

JW5005H Handheld Video Microscope Operation Manual SAFETY SUMMARY Personnel concerned with the operation of this instrument must thoroughly understand and follow the safety guidelines below. The manufacturer assumes no liability for the operator’s failure to observe these guidelines. Warning – Laser Radiation Hazard Operators must always remember that laser radiation at or above 1mW has the potential to cause serious damage to the human eye. Never look into the open end of an optical fiber where high level of laser radiation may be present. Warning - Explosive Atmospheres To avoid explosion, do not operate this instrument in the presence of flammable gases or fumes. Caution Operators should not operate this instrument with any of its covers removed, nor should they allow anyone else to do so. Do not attempt to carry out any unauthorized service to this instrument. Always return the instrument to an authorized service centre for repair to ensure that safety features are maintained. CONTENTS Page Overview 4 Features 5 Description 6 Operation 9 Specifications 11 Overview Reliability and performance of a fiber optic link largely depends on the quality of interconnects. Contaminated connectors can cause the mating surfaces to separate leading to high insertion loss and back-reflection. Furthermore, some dirt particles can even scratch or dig into the glass causing permanent damage to the end-face of the connector. Therefore, inspection of fiber optic connectors should be performed whenever a connection is to be made. The JW5005H is a handheld microscope specifically designed for fiber optic connector end face inspection. Features FC/SC/ST/E2000/LC/MU/MPO compatible 3.5-inch TFT display Up to 250x overall magnification 4x digital zoom SD card storage up to 8G Snapshot, video recording and playback PC plug-and-play Description 1. Main Unit 2. Probe O