毕业论文冷藏车辆室内温度测量系统的设计剖析.docVIP

本科毕业设计（论文） 题目 学 院 年 级 专 业 班 级 学 号 学生姓名 校内导师 职 称 校外导师 职 称 论文提交日期 本科毕业设计(论文论文。运输温度产品品质。温度过高，会产品衰老；温度过低，使产品容易。此外，在运输过程中，温度过大都对保持产品质量不利。 关键词　Abstract 　Along with the developmentf science and technology, peoples demand for the quality of frozen food is increasingly improved. So the extension of Highway Refrigerated Transport has also developed. Measuring temperature is the most important in refrigerated transport. Transport temperature is the key factor to affect the quality of products. If the temperature is too high, it will make the product aging; temperature is too low, may make the product easy to freeze. In addition, in the transport process, temperature fluctuations in large or frequently to maintain product quality disadvantage.N owadays, the computer measurement and control technology develop rapidly and widely applicable. based on singlechip temperature gathering and control system development and application greatly improve the production of temperature in refrigerated transport . This design AT89C51 describes a kind of mainly by MCU control unit, for temperature sensor DS18B20 temperature measurement system. The measurement system can real-time storage temperature data. System design related hardware circuit and related applications. Keywords：Refrigerated Transporter；AT89C51； DS18B20 目 录 1. 引言…………………………………………………………………………1 1.1课题研究的背景……………………………………………………1 1.2国内外冷藏车发展情况……………………………………………1 1.3研究冷藏车辆室内温度测量的目的和意义…………………………………………3 2.设计的整体方案..............................................3 2.1设计的主要内容………………………………………………………………………3 2.2设计性能要求………………………………………………………………………4 3.温度测量系统选型分析………………………………………………………………4 3.1单片机的选择…………………………………………………………………………4 3.1.1 AT89C51的特点及选择