数字电路系统设计代码.doc

第一讲 FPGA器件介绍，ISE开发环境介绍 第二讲 （1）以一个三位加法器为例介绍开发流程 （2）点亮8个LED led.vhd文件 library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity led is Port ( led : out STD_LOGIC_VECTOR (7 downto 0)); end led; architecture Behavioral of led is begin led end Behavioral; led.ucf文件 NET LED[7] LOC=G1; NET LED[6] LOC=P4; NET LED[5] LOC=N4; NET LED[4] LOC=N5; NET LED[3] LOC=P6; NET LED[2] LOC=P7; NET LED[1] LOC=M11; NET LED[0] LOC=M5; (3)按键控制led的亮灭 按下bnt0,LED0亮，再次按下，LED灭，依次下去 library IEEE; use IEEE.STD_LOGIC_1164.ALL; entity ledbutton is Port ( button : in STD_LOGIC; led : out STD_LOG