CDRL23.5DTM-12-xxxx弯灯常规试验程序A.docVIP

常 规 试 验 程 序 Routine Test Program FORM NO: QA4019100927-2 REV:B 客 户 Buyer 青岛四方—庞巴迪铁路运输设备有限公司BST Product 主 灯 Main light 生产数 Qty 型 号 P/N DTM-12-xxxx 生产批号 L/N 产品编号 S/N 序号No. 检验项目 Item 检 验 要 求 Criteria 检 验 记 录 Record 1 老化 aging 55℃温度下；正常连续通电时间：48小时，工作正常。 Under 55℃, with continuous electrical running time：48 H, worked properly. 2 性能测试 Function test 功率测试：见表3 Power test；please refer to Table 3 发光正常，无暗区或暗点,无明显色差。 Well illumination, no dim spot and dark area. no color. 输入电压范围的测试 输入电压在DC77V ～ DC137.5V范围内，不影响灯正常工作。Input voltage between DC77V ～ DC137.5V, light can work normally. 4、照 度Illumination 将灯接通电源，照度见表3（中心, d = 1500 mm） The lamp power，illumination in Table 3 3 外观结构 Visual inspection 外观应整洁，表面不应有凹痕，划伤、裂缝、变形等现象。金属件无锈蚀及其它机械损伤。接地和固定螺柱清洁完整。标志清晰，位置正确，牢固。 The surface should be clean, no dent, scratch, crack and distortion. The metalwork must be free from rust and mechanical damage. Grounding and stud bolts should be clean and complete. Clear identification, firm and correct position. 4 外形尺寸 Figure dimension 外形长度见表3 Outline and length please refer to table 3. 部件安装 Parts mounting 零部件安装位置正确，紧固无松动。 Parts installation location is correct, no loose fastening 5 绝缘性能 Insulation test 用直流500V档的兆欧表测试电源线与公共地线(外壳)的绝缘电阻≥50MΩ。 To test the insulation resistance between the power and earth (shell) with DC 500V multimeter, should be ≥50MΩ. 6 耐压试验 Voltage withstand test 电源线与外壳间施加一个1500VAC，50Hz的交流电流电持续1min无击穿现象。 Adding DC1500V voltage to the different levels of the PCB or between the PCB and the shell last 1min, no breakdown. 7 绝缘性能 Insulation test 用直流500V档的兆欧表测试电源线与公共地线(外壳)的绝缘电阻≥50MΩ。 To test the insulation resistance between the power and earth (shell) with DC 500V multimeter, should be ≥50MΩ. 8 重量 Weight 见表3 Refer to Table 3 9 包装 Packing 按包装、储存技术规程要求（包装箱包装，包装须防振、防潮、防腐）。According to packing, storage technology requirement(packing box, and the packing should shockproof, moistu