行业标准规范英汉对照-通用零部件2.docVIP

行业标准规范英汉对照-通用零部件2 151 GB/T 866-1986 半沉头铆钉 (粗制) Oval countersunk head rivets--Black 152 GB/T 867-1986 半圆头铆钉 Round head rivets 153 GB/T 868-1986 平锥头铆钉 Cone head rivets 154 GB/T 869-1986 沉头铆钉 Countersunk head rivets 155 GB/T 870-1986 半沉头铆钉 Oval countersunk head rivets 156 GB/T 871-1986 扁圆头铆钉 Flat round head rivets 157 GB/T 872-1986 扁平头铆钉 Thin head rivets 158 GB/T 873-1986 扁圆头半空心铆钉 Oval head semi-tubular rivets 159 GB/T 874-1986 120°沉头半空心铆钉 120 degree countersunk head semi-tubular rivets 160 GB/T 875-1986 偏平头半空心铆钉 Thin head semi-tubular rivet161 GB/T 876-1986 空心铆钉 Tubular rivets 162 GB/T 877-1986 开尾圆锥销 Taper pins with split 163 GB/T 878-1986 螺纹圆柱销 Parallel pins with external thread 164 GB/T 879-1986 弹性圆柱销 Spring-type straight pins—Slotted 165 GB/T 880-1986 带孔销 Pins with split pin hole 166 GB/T 881-1986 螺尾锥销 Taper pins with external thread 167 GB/T 882-1986 销轴 Clevis pins with head 168 GB/T 883-1986 锥销锁紧挡圈 Lock rings with cone pin 169 GB/T 884-1986 螺钉锁紧挡圈 Lock ring with screw 170 GB/T 885-1986 带锁圈的螺钉锁紧挡圈 Lock rings with screw and circlip 171 GB/T 886-1986 轴肩挡圈 Rings for shoulder 172 GB/T 889-1986 1 型非金属嵌件六角锁紧螺母 Prevailing torque type hexagon nuts (with non-metallic insert),style 1 173 GB/T 891-1986 螺钉紧固轴端挡圈 Lock rings at the end of shaft with screw 174 GB/T 892-1986 螺栓紧固轴端挡圈 Lock rings at the end of shaft with bolt 175 GB/T 893.1-1986 孔用弹性挡圈--A型 Circlips for holes--Type A 176 GB/T 893.2-1986 孔用弹性挡圈--B型 Circlips for hole--Type B 177 GB/T 894.1-1986 轴用弹性挡圈--A型 Circlips for shaft--Type A 178 GB/T 894.2-1986 轴用弹性挡圈--B型 Circlips for shaft--Type B 179 GB/T 895.1-1986 孔用钢丝挡圈 Roundwire snap rings for hole 180 GB/T 895.2-1986 轴用钢丝挡圈 Roundwire snap rings for shaft 181 GB/T 896-1986 开口挡圈 E rings 182 GB/T 897-1988 双头螺柱 bm=1d Double end studs--bm=1d 183 GB/T 898-1988 双头螺柱 bm=1.25d Double end studs bm=1.25d 184 GB/T 899-1988 双头螺柱 bm=1.5d Double end studs bm=1.5d 185 GB/T 900-1988 双头螺柱 bm=2d Double end studs bm=2d 186 GB/T 901-1988 等长双头螺柱 B级 Double en