ST STLUX35A 100W街灯照明解决方案.docxVIP

ST STLUX385A 100W街灯照明解决方案 时间：2016-03-29 10:45:50?????? 作者：ST?????? 来源：中电网 ST公司的STLUX385A是集成了多达6个可编程PWM发生器,96MHz PLL和数字可寻址照明接口(DALI),PWM分辨率为1.3ns,CPU频率为16MHz,总线频率为1.2, 2.4或4.8 kHz,器件具有多种架构和应用,包括驱动多个LED串的降压转换器,用于PFC的升压转换器,用于大功率可调光的半桥谐振转换器和用于HID灯镇流器的全桥控制器.本文介绍了STLUX385A主要特性,框图,以及100W街灯照明解决方案STEVAL-ILL066V1主要特性,框土,电路图和材料清单.The STLUX? family of controllers is a part of the STMicroelectronics?digital devices tailored for lighting and power conversion applications. The STLUX controllers have been successfully integrated in a wide range of architectures and applications, starting from simple buck converters for driving multiple LED strings, boost for power factor corrections, half-bridge resonant converters for high power dimmable LED strings and up to full bridge controllers for HID lamp ballasts.STLUX385A主要特性:Up to 6 programmable PWM generators (SMEDs-“State Machine Event Driven”)?10 ns event detection and reactionMax.1.3 ns PWM resolutionSingle, coupled and two coupled operational modesUp to 3 internal/external events per SMEDDALI (digital addressable lighting interface)?Interrupt driven hardware encoderBus frequency: 1.2, 2.4 or 4.8 kHzIEC 60929 and IEC 62386 compliant plus 24-bit frame extensionConfigurable noise rejection filterReverse polarity on Tx/Rx lines4 analog comparators?4 internal 4-bit references1 external referenceLess than 50 ns propagation timeContinuous comparison cycleADCs (up to 8 channels)?10-bit precision, with operational amplifier to extend resolution to 12-bit equivalentSequencer functionalityInput impedance: 1 MΩConfigurable gain value: x1 and x4Integrated microcontroller?Advanced STM8??core with Harvard architecture and 3-stage pipelineMax. fCPU?: 16 MHzMultiple low power modesMemories?Flash and E2?PROM with read while write (RWW) and error correction code (ECC)Program memory: 32 Kbytes Flash; data retention 15 years at 85?℃ after 10 kcycles at 25℃Data memory: 1 Kbyte true data E2?PROM; data retention:15 years a