cy公司预绞式金具研发项目进度计划与控制研究--大学生学位论文.docVIP

硕士学位论文 CY公司预绞式金具研发项目进度计划与控制研究 申请人：XXXX 指导教师: XXXXXXXX 学科领域：项目管理 2015年10月 The Study on the Schedule Plan and Control of Pre twisted type hardware Development Project for CY Company Thesis Submitted to Xi’an Jiaotong University In partial fulfillment of the requirement for the degree of Master of Engineering By XXXX Supervisor: XXXXXX (Project Management) October 2015 论文题目： 学科领域：项目管理 申 请 人： 指导师： 摘 要 本文阐述了项目进度管理的基础知识；以CY公司预绞式金具研发项目的进度计划与控制为研究对象，在项目中建立WBS工作分解结构模型，通过将项目分解为若干个相对独立的工作任务，阐明各工作任务之间的相对逻辑关系和费用预算，在此基础上对项目的工期和费用进行分解，编制出项目进度计划。利用调整关键工序逻辑顺序、工期成本优化、蒙特卡洛仿真等方法，对关键路线上工作任务的工期进行优化，把工期从原来的384天缩短至291天。然后针对优化后的项目进度计划进行监控分析，首先分析影响项目进度的主要因素，然后制定保证项目进度控制有效运行的保障措施， 通过理论与实际结合对CY公司预绞式金具研发项目进度计划进行有效的优化与控制，使项目进度计划得以按时实施，为企业产品研发项目的进度计划和控制提供实践参考。 关 键 词：项目管理；进度管理；挣值法 论文类型：应用研究 Title: The Study on the Schedule Plan and Control of Pre twisted type hardware Development Project for CY Company Professional Fields: Project Management Applicant: XXXXX Supervisor: XXXXX ABSTRACT In this paper, Pre twisted type hardware development project for CY Company as the research object, the schedule optimization and control research of which has important practical significance. This paper expounds the basic knowledge of project schedule management. This thesis regards Pre twisted type hardware development project for CY Company as a research object. Firstly, the project is broken down into several relatively independent processes with clear logical relationship with the work breakdown structure (WBS) technique. Secondly, according to the logical relationship and the project budget, the paper decomposes the project duration and expenditure, and draws up the initial project schedule. Thirdly, the author utilizes the key working procedure logical order, the time cost optimization and Monte Carlo simulation methods to optimize the processes on the critical path, which decreases duration from 384 days to 291 days. In the control of schedule plan, the author firstly analyzes on the main factors a