Ansys20_CFX_官方教程__0HeatTransfer.ppt

* * * * Heat Transfer 10-* ANSYS, Inc. Proprietary ? 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual CFX 12.0 Introductory Training TOC-* ANSYS, Inc. Proprietary ? 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual Heat Transfer 10-* ANSYS, Inc. Proprietary ? 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Training Manual 10-* ANSYS, Inc. Proprietary ? 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 TOC-* ANSYS, Inc. Proprietary ? 2009 ANSYS, Inc. All rights reserved. April 28, 2009 Inventory #002598 Chapter 10Heat Transfer Introduction to CFX  Governing Equations Continuity Momentum Energy where Conservation Equations Heat transfer in a fluid domain is governed by the Energy Transport Equation: The Heat Transfer Model relates to the above equation as follows None: Energy Transport Equation not solved Isothermal: The Energy Transport Equation is not solved but a temperature is required to evaluated fluid properties (e.g. when using an Ideal Gas) Thermal Energy: An Energy Transport Equation is solved which neglects variable density effects. It is suitable for low speed liquid flow with constant specific heats. An optional viscous dissipation term can be included if viscous heating is significant. Total Energy: This models the transport of enthalpy and includes kinetic energy effects. It should be used for gas flows where the Mach number exceeds 0.2, and high speed liquid flows where viscous heating effects arise in the boundary layer, where kinetic energy effects become significant. Sources Viscous work Convection Transient Conduction Governing Equations Governing Equations For multicomponent flows, reacting flows and radiation modeling additional terms are included in the energy equation Heat transfer in a solid domain is modeled using the following conduction equation Source Transient Conduction Selecting a Heat Transfer Mode