2毕业设计汇总.docVIP

2015届本科毕业论文（设计） 题目：3D打印ABS材料的条件探究及其机械性能测定×80×4的长方形，改变3D打印机上的打印温度、填充密度、层高、顶部/底部厚度等参数，测定不同参数对ABS产品的机械性能测定。大大减少因温度等原因下原材料的浪费，节省成本，提高制作精度，提高产品的硬度。使3D打印能更好的应用于人们的日常生活中。得出样品在打印温度220℃、填充密度80%、层高0.2mm、顶部/底部厚底0.4mm的条件下，其机械性能最佳。 关键词：3D打印机；ABS材料；熔融；机械性能 3D print ABS material condition inquiry and its mechanical property determination Abstracts: 3D printing technology is the use of three dimensional ink-jet printing technology, the way of the combination of the layering processing and superposition forming, printing material layer by layer increased to increase the material to generate the 3D entity, and the other to the laser forming 3D model manufacturing technology as the real object of digital manufacturing technology 3D. Its biggest advantage is that can be extended to design personnels imagination, as long as can be designed into a 3D graphics in computer, whether different styles of clothing, fine arts and crafts, or personalized car, as long as the solution to the problem of material, can achieve 3D print. Therefore, this experiment is the use of fused deposition manufacturing technology based on the ABS 3D printer, the condition of material and mechanical properties were determined by national standard, the main production of rectangular 10×80×4, change the 3D printer to print the temperature, packing density, height, top / bottom thickness, determination of different parameters on the mechanical properties of ABS product. Reduce waste, the temperature of the raw materials and other reasons to save cost, improve the manufacturing accuracy, improve the hardness of products. The 3D print can be better used in peoples daily life. The samples in a temperature of 220 DEG C, print density, filling conditions 80% storey 0.2mm, top / bottom thickness of 0.4mm, the best mechanical properties. Key words: 3D ABS printer; materials; melting; mechanical properties; 1. 前言 3D打印技术与3D印刷是两个完全不同的概念，3D印刷是将图片分离成不同角度的红、蓝两张图片，然后将两张图片按照规定的距离印在一起，并用特殊眼睛观察看来形成3D视觉效果