最新建工院0级毕论文(实习报告)范本.docVIP

  • 2
  • 0
  • 约2.98千字
  • 约 5页
  • 2017-05-10 发布于贵州
  • 举报

最新建工院0级毕论文(实习报告)范本.doc

最新建工院0级毕论文(实习报告)范本

毕业论文(设计) 题 目: 专 业: 学生姓名: 学生学号: 指导教师: 日 期: 实习报告原创性声明(采用3号宋体加粗,居中) 本人郑重声明:所呈交的报告是本人在指导教师下,独立进行研究工作取得的成果。除了文中特别加以标注引用的内容外,本报告中不包含任何其他个人或集体已经发表或撰写过的作品成果。对本文的研究做出重要贡献的个人和集体,均已在文中以明确方式标明。本人完全明确本声明的法律责任,本人对本论文导致的所有问题承担全部责任。 报告作者签名: 日期: 年 月 日 目 录 一、XXX公司基本情况介绍…………………………………… ……………………1 1、 2、 二、实习岗位介绍……………………………………………………………………2 1、 2、 三、实习工作情况………………………………………………………………………3 1、 2、 四、实习总结……………………………………………………………………………5 1、 2、 五、对学校的建议………………………………………………………………………5 摘要(采用小三号宋体加粗,居中) 摘要内容(采用小四号宋体) 关键词(采用小三号宋体加粗,居中) 关键词内容(采用小四号宋体) XXX(单位名称)实习报告(采用三号黑体,居中) 一、XXX公司基本情况介绍(采用小三号宋体加粗) (主要包括公司行业性质;公司简介;经营规模,如资产、权益情况、收入利润情况;经营范围等;重点介绍所学专业政策、方法。)(采用小四号宋体,行距1.25倍) 二、实习岗位介绍 主要包括实习岗位的主要工作任务;工作要求及标准;相关制度及内容。 三、实习工作情况 详细记录实习工作的内容及工作流程;工作中遇到的问题及解决方法等。 四、实习总结 分条列明主要收获和体会,包括专业方面;思想认识方面;其他方面等。 五、对学校的建议 根据实习的认识和感受,对学校教学与管理提出建议。如:哪些长处值得肯定和发扬;哪些知识、技能、素质需要增加或强化等。 参考文献(采用小三号宋体加粗,居中) pump speed (c) is proportional. A, a party; B, the second party; C/third party. ... A, increasing amplitude increases with the increasing speed of b, the amplitude is independent of load amplitude decreases with the increase of load c, d, amplitude increases as the load when the static friction occurs when the turbo-generator shaft (b). A vibration phase angle is constant b changes, vibration phase angle is c, sometimes constant vibration phase angle and sometimes d, vibration phase angle start, later increased the load on the turbine swing value to a slow rate of speed control system (a). Inversely proportional to the proportional to a, b, c, a nonlinear relationship between d, independent of when the rotor critical speed lower than the speed (d) only when the oil film oscillation may occur. A, 4/5 b, 3/4 c, 2/3 d, at the sliding-parameter shutdow

文档评论(0)

1亿VIP精品文档

相关文档