集装箱构造.pptVIP

第一讲 集装箱构造 　在进行集装箱货物装拆箱检验鉴定时,必须要熟悉掌握集装箱的基本构造和一些残损用语,以便对箱损情况做出正确表达和准确描述。同时，目前所接检验业务，多为外资客户，要求用英文书写检验报告，故后面所述附有英文对照。 　 一、门端结构 1.后门 door panel　　　　　　 2.左门 left door 3.右门 right door 　　　　　　 4.门把 locking bar 5.门把手 handle 　6.门锁牌 seal pin 7.门手托 latch 　8.门锁扣 cam lock keeper 9.门锁钩 cam lock 　 10.密封胶 gasket 11.门框架 hinge frame 　 12.门铰链 hinge 13.门槛 door sill 　 14.大码仔 bracket 15.小码仔 clip 　16.遮雨板rain gutter 17.门边铁door lap 18.货箱牌照 consolidated data plate (注:货柜牌照内容主要包括货箱安全限制标记CSC plate,注册港海关标记Customs plate,货箱制造日期Date of manufacture等,作为研判货箱是 否年久失修等用,也可称作CSC plate ) 二、箱顶结构 1.顶板 roof sheet (top panel) 2.顶排骨 roof bow 3.顶梁 top rail (1)右顶梁 right top rail (or right upper side rail) (2)左顶梁 left top rail (or left upper side rail) (3)后顶梁 rear top rail (or top end rail) (4)前顶梁 front top rail (or top front rail) 三、底部结构 1.底梁 bottom rail (1)左底梁 left bottom rail (left side bottom rail) (2)右底梁 right bottom rail (right side bottom rail) (3)门底梁 door bottom rail (4)前底梁 front bottom rail　 2.底横梁 cross member 3.底短横板 tunnel plate 4.底短直梁 tunnel rail 5.底短横梁 tunnel cross member 四、侧壁结构 1.左侧壁(左旁) left side wall (or left panel) 2.右侧壁(右旁) right side wall (or right panel) 3.侧壁板 side sheet (or side panel sheet) 4.侧壁柱(旁企柱) side post (or side panel post) 5.叉槽 fork pocket 7.叉槽铁 safety plate 8.气窗 ventilator cover 五、箱内结构 1.地板 flooring (注意:货柜地板不能用floor表示) 2.地板铁 threshold plate 3.内顶排骨(顶梁)roof bow 4.侧壁内衬板 side lining 5.端壁 end wall 6.端壁板 front sheet 六、角件结构 1.角柱 corner post 2.角柱锁 corner casting (or corner fitting) 七、八梁四柱 八梁: 1.前顶梁 front top rail 2.前底梁 front bottom rail 3.后顶梁 rear top rail 4.门底梁 door bottom rail 5.左顶梁 left top rail 6.左底梁 left bottom rail 7.右顶梁 right top rail 8.右底梁 right bottom rail 四柱: 1.左壁左角柱(或称前壁右角柱) left corne