水磨粉双滚筒干燥机总体设计及输送装置机械CAD图纸设计.doc

水磨粉双滚筒干燥机总体设计及输送装置设计 摘 要：滚筒干燥器是通过转动的圆筒，以热传导的方式，将附在筒体外壁的液相物料或带状物料，进行干燥的一种连续操作设备。设计该机器的用途是除去某些原料、半成品小的水分或溶剂，使物料便于包装、运输、贮藏、加工和使用。本设计所干燥的原料为水磨粉，考虑到其特殊性质以及产量等实际情况，故采用底部进料的同槽式双滚筒干燥机用来干燥。双滚筒干燥机是由同一套减速传动装置，经相同模数和齿数相同的一对齿轮啮合，使两组相同直径的滚筒相对转动，达到干燥物料的目的的设备。本课题的主要设计任务包括：1．总体设计 (1)制定总体方案，确定滚筒、刮料装置及输送装置配置型式、结构方案；(2)完成动力设计、运动设计、结构设计、热工计算；(3)绘制总装配图。2．刮料装置设计 (1)刮料装置装配图；(2)零件图；(3)有关计算、校核等。3．输送装置设计 (1)输送装置装配图；(2)零件图；(3)输送装置三维爆炸图；(4)有关计算、校核等。此装备的主要优点有：(1)热效率高；(2)干燥速率高；(3)适用范围广；(4)供热介质简便等。 关键词：干燥；双滚筒；刮刀；螺旋输送器 The Design of Water Mill Double-drum Dryer and Transmission Device Abstract ：Drum dryer through the rotating cylinder to heat conduction, will be attached to the outer wall of the cylinder of liquid material or herpes materials, a dry continuous operation of equipment. Design of the machine is to remove the use of certain raw materials, semi-finished products of small water or solvent, will enable small packaging materials, transportation, storage, processing and use. The design of dry raw materials for water mills, taking into account its special nature of the actual yield, Therefore, using the bottom of the feed trough with the double-drum dryer for drying. Double-drum dryer is a deceleration from the same gear, same modulus and the same number of teeth of a gear meshing, so that the two sets of the same diameter rotating drum relative to achieve the purpose of drying materials equipment. The main topics include the design task:1. Design (1)The development of the overall program, the drum set, scratching device and transmission type device configuration, structure programs; (2)Completion of dynamic design, campaign design, structure design, thermal calculation; (3) Preparation of the assembly. 2. Scraper device (1) The scratch device assembly;(2)Parts map;(3) The relevant calculations, Check .3. Transportation device (1) Delivery devices assembly; (2) Parts map; (3) Delivery devices exploded 3D map; (4) The calculation and Check This equipment of the main advantages are : (1)Hig