凸轮轴摇臂室座气水双检机机械CAD图纸设计.doc

摘要 为了提高发动机的工作性能，提高产品的生产质量，减少零件的生产成本，又由于凸轮轴摇臂室座Abstract In order to improve engine performance, increase the product quality, reduce the production cost of parts, another the camshaft rocker seat casting, because the have trachoma, porosity, shrinkage, Phi sewing defects and affect the performance of the engine. Therefore, to design a camshaft rocker seat air-water double-check to detect the quality of the camshaft rocker. The gas-water double-check machine rack assembly, the assembly of the tank, the main pressure seal device, pressure sealing device on the right, the left side of the supporting device, after dam device, rocker device, non-motorized track, the base assembly, electrical cabinets components, hydraulic station. According to the testing requirements, the device is working, the manual will be seized artifacts pulled into the table plate good location, press the start button with both hands, clamping the workpiece clamping device, and then plugging the device moves the workpiece closure. Closure is in place, the leak detector to start on demand the workpiece cavity filled with compressed air, balanced and testing, the instrument displays the value of the leak of the workpiece by the indicator in the control panel displayed at the test results, and then cutting; fail piece tank up, easy to find the leak. The machine uses a single station with separate clamping and closure fixture in the form of the workpiece is detected, the use of a dry-type gas leak detector, leak detection of the workpiece. The clamping and plugging hydraulic as the driving force. Equipment rack with aluminum assembled frame structure, replacement and fixture design for easy product changeover. Keywords： Closure fixturePneumatic system Hydraulic system Pressure seal device 目录 摘要 I Abstract II 1 绪 论 1 1.1 本课题的来源、目的及意义 1 1.1.1课题的来源 1 1.1.2本课题研究目的 1 1.1.3本课题研究的意义 1 1.2 课题背景及国内外研究现状 2 1.2.1课题的国内外研究现状 2 1.2.2课题的研究趋势预测 3 1.2.3课题的技术领域和背景技术 3 1.3 开展本课题预计达到的要求及关键技术 4 1.3.1 被加工零件分