带式输送机液压张紧装置机械CAD图纸设计.doc

中国矿业大学毕业设计任务书 毕业设计题目： 带式输送机液压张紧装置设计 毕业设计专题题目： 毕业设计主要内容和要求： 了解长距离带式输送机的工作过程、张紧装置的作用，了解各种张紧装置的工作原理及特点，设计一台液压张紧装置。 设计参数：张紧力200KN、张紧行程10m 设计内容： 1.根据相关参数完成液压张紧装置的总体设计； 2.完成泵、阀等液压元件的选型设计及液压系统设计； 3.完成主要零、部件的工作图设计； 4.编写完成设计计算说明书。 摘 要 张紧装置是带式输送机不可缺少的部分，是影响输送带动张力的主要部件之一，它直接关系到带式输送机的安全运行及使用寿命，对于大运量、长距离等大型带式输送机的正常运行而言尤为重要。 本带式输送机液压张紧装置的设计是在吸收国、内外输送机张紧技术的基础上，根据国内带式输送机的运行特点及要求研制的一种新型液压张紧装置。采用比例控制技术及可靠性较高的可编程控制技术，可以对张紧力进行多点控制，根据不同工作情况随时调节张紧力的大小。自动实现在胶带机在启动时提供较大张力（约为正常运行时张力的1.5倍），正常运行时较小张力使胶带在工作过程中有科学合理的张力，即防止了胶带启动时打滑，又可使胶带机正常运行不在过紧状态。; Abstract The stretching device is the belt conveyer essential part, is affects the transportation to lead one of tensity major components, its direct relation belt type conveyers safe operation and the service life, speaking of the great transportation amount, the long distance and so on large-scale belt conveyers normal operation especially important. This belt conveyer hydraulic pressure stretching devices design is in the absorption country, the inside and outside conveyers tighten in the technical foundation, according to domestic belt conveyers movement characteristic and request development one kind of new hydraulic pressure stretching device. Uses the proportional control technology and the reliability high programmable control technology, may carry on the multi-spot control to the tensioning force, momentarily adjusts the tensioning force according to the different working condition the size. Realizes automatically in the adhesive tape machine when the start provides the big tensity (approximately for normal operation when tensity 1.5 times), when normal operation small tensity. Enables the adhesive tape to have the science reasonable tensity in the work process, namely prevented the adhesive tape started when to slip, might also cause the adhesive tape machine normal operation not at the tight condition. May lengthen adhesive tapes life using this equipment, saves conveyers run cost greatly. In this design, incre