基于PLC污水处理控制系统的机械CAD图纸设计.doc

毕 业 设 计论 文 任 务 书 一、题目及专题： 题目　　 　　 、专题　 　 二、课题来源及选题依据 PLC作为工业污水处理的控制系统使得设计过程变得更加便，能够实现的功能变得更多。可以与各类人机界面的通信完成PLC控制系统的监视，同时使用户方便通过操作界面功能控制PLC系统。由于PLC的CPU强大网络通信能力，使得工业污水处理系统的数据传输与通信变为可能，并且也可实现其远程监控。 三、本设计（论文或其他）应达到的要求： 熟悉技术的发展历程，； 熟练掌握的原理以及方法； 熟； 掌握； 。 四、接受任务学生： 五、开始及完成日期： 自20年月日 至201年5月2日 六、设计（论文）指导（或顾问）： 指导教师　　　　　　　签名 签名 　　　　　　　签名 教研室主任 　　　　　　〔学科组组长研究所所长〕　　　　　　　签名 　　 　　系主任 　　　　　　签名 20年1月日摘 要 关键词： Abstract Today, the majority of our sewage treatment control system low level of automation, security is not high, mismanagement, the efficiency lower than the standard markedly. Sewage disposal system in the aeration process control, data communications and monitoring and management of these problems are urgently needed to be addressed. Sewage treatment automatic control system in China is relatively backward, the high cost of sewage treatment, wastewater treatment plant discharge treated effluent quality is not stable, so how to create a good and effective automatic control system, improve operating results, lower operating costs, has a very important significance. This article describes the basic process of the plant sewage treatment and research to design a wastewater treatment program based on PLC control. The article first described the sewage treatment control system based on PLC technology and processes, the basic principles and steps of the control system hardware architecture and design, working principle and design of PLC control system, which can show that the application of PLC in the sewage treatment process. Requirements of the Sewage design electrical control equipment and automatic control circuit, including the start and stop, the status fault signal and signal acquisition, the final design of PLC control system in accorda