角片套冷冲压工艺及级进模毕业机械CAD图纸设计论文.doc

毕 业 设 计论 文 任 务 书 一、题目及专题： 题目　　　 、专题　 　 二、课题来源及选题依据 三、本设计（论文或其他）应达到的要求： 在规定的时间内内容如下：模装配图：张 2．零件图5张）； 3．冷冲压工艺卡片：1张 4．设计说明书：1份（其中参考文献不少于） 5．翻译外文印刷字符000字的有关技术资料或专业文献，内容要尽量结合课题四、接受任务学生： 五、开始及完成日期： 自20年月日 至201年月2日 六、设计（论文）指导（或顾问）： 指导教师　　　　　　　签名 签名 　　　　　　　签名 教研室主任 　　　　　　〔学科组组长研究所所长〕　　　　　　　签名 　　 　　系主任 　　　　　　签名 20年1月日摘 要 关键词： Abstract The die by cutting waste stamping, die structure incision, drawing, red pilot hole, drawing guide, cut waste, bending, the cut process design, arranged in a single row of horizontal nesting.And dress design the die structure, the die attached to the lower die part, in order to properly control the feeding step unilateral side of the blade fixed pitch, in the main location pilots to precise positioning.As the material is thin, stamping speed, the discharge may be used in the elastic unloading structure, it is recommended that the elastic material with spring. Waste using the die (down die) launched down the final product is lower die down soon.Strip automatic feeding device left and right side pressure. In order to properly control the feeding step away from the side of the blade fixed pitch. As the material is not very thick, stamping moderate speed, the discharge elastic unloading structure, elastic material with rectangular cross-section spring.The waste products are used down soon.Automatic feeding device with material from right to left. Stamping process analysis consider the stamping process, most notably including the technical and economic aspects.On the technical side, according to the product drawings, mainly analyzes the characteristics of the shape of parts, size, accuracy requirements and material properties and other factors meets the requirements of the stamping process;In economic