立辊轧机侧压系统机械CAD图纸设计.doc

立辊轧机侧压系统设计 摘要 现代带钢热轧过程中，立辊轧机一般被布置在粗轧机前，它的主要作用是破鳞和调宽。为了满足不同的使用要求，穿过轧辊间的钢板的宽度是不同的，而轧辊间隙的调整就是通过立辊轧机的侧压系统来实现的。本设计的主要内容就是通过大学里所学的知识对立辊轧机的侧压系统进行综合的分析，研究，设计，完善，其作用不仅是各种知识的结合运用，也是对设计人员的学习成果和能力的一次检验。 本设计第一章描述了立辊轧机的用途和特点，以及国内外的发展状况；第二章确定了总体设计方案，主要讨论了轧辊系统，万向接轴，侧压系统的结构和特点；第三章是结构参数的确定，通过压下量来确定轧辊的辊径和辊身长度；第四章主要是通过侧压系统的力矩计算来选择电机；第五章对主要零部件进行校核，设计，包括蜗杆蜗轮，侧压螺丝螺母；第六章是对润滑系统讨论。最后是对设计成果的总结及对设计指导老师和同学的感谢。 关键词：立辊轧机，侧压系统，侧压螺丝，侧压螺母 The design for press system of rolling mill Abstract In modern hot steel rolling process,the edger is generally arranged in the front of the roughing mill,its main function is to break the scale and adjust the breadth. The width that cuts through the steel plate of roll is different for satisfying the different usage request,but the adjustment to the cleft of roll is carried out by the press system.The main contents of this design is to carry on the comprehensive analysis,research ,design ,perfect to the press system of the rolling mill by the knowledge learning in the university,its function not only is various knowledge to combine the usage ,also be to design the personnel of the study result and an examination of the ability. Chapter 1 describes the use and characteristics of the rolling mill, and domestic and international development condition;Chapter 2 made sure the total design project,mainly discussing the structure and the characteristics of the rolling system,connect spindle and the press system;Chapter 3 is the structure parameter to really settle,made sure the radius of the roll and the face length by reduction;Chapter 4 describes that use the press systems moment to choose the electrical engineering;Chapter 5 carries on the examination and design to the main parts,include the worm,worm gear,housing screw and screw box; Chapter 6 is to discuss to the lubrication system. The end of the design is the summary to design result and the gratitudes to guide and classmate. Key words:rolling mill,press system,housing screw,screw box 目录 1绪论4 1.