六家煤矿0.9Mta新井机械CAD图纸设计.doc

摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为六家矿0.9Mt/a新井设计。六家煤矿位于内蒙古东南面，交通便利。井田走向（东西）长约2km，倾向（南北）长约3km，井田总面积为6km2。主采煤层为6-2、6-3号煤，平均倾角为10°，煤层平均总厚为11m。井田地质条件较为简单。 井田工业储量为85.67Mt，矿井可采储量55.04Mt。矿井服务年限为47a，涌水量不大。 矿井年工作日为330d，工作制度为“三八”制。 一般部分共包括10章：1.矿区概述及井田地质特征；2.井田境界和储量；3.矿井工作制度及设计生产能力、服务年限；4.井田开拓；5.准备方式-带区巷道布置；6.采煤方法；7.井下运输；8.矿井提升；9.矿井通风与安全技术；10.矿井基本技术经济指标。 专题部分题目: 软岩开拓巷道支护研究 翻译部分主要内容: 放顶煤开采参数研究 分析了软岩巷道的特征和成因、软岩分类及软岩巷道界限的判别、软岩巷道的维护原理。并对软岩巷道的支护技术，软岩巷道支护的设计方法和软岩巷道底鼓的治理和软岩巷道锚索支护方法进行了系统的说明。 再通过对六家矿软岩开拓巷道支护实例，进行围岩性质和巷道破坏原因分析，确定采用围岩注浆加固及底板组合锚索支护技术对失修巷道进行治理，解决该矿软岩开拓巷道的支护问题。 英文题目为: study on top caving coal mining parameter 关键词：工业储量 ；立井开拓 ；工作制度 ；采煤方法 ；矿井通风 ABSTRACT This design includes of three parts: the general part, special subject part and translated part. The general part is a new design 0.9Mt/a of Liujia mine. Daihe mine lies in northeast of Chifeng of NMG province. The traffic of road and railway is very convenience to the mine. The run of the minefield is2km ,the width is about 3km，well farmland total area is 6㎞2.The 6-2、6-3 is the main coal seam, and its dip angle is 10 degree. The thickness of the mine is about 11m in all. The proved reserves of the minefield are 85.67Mts. The recoverable reserves are 55.04Mts.The service life of the mine is 47 years. The mineral well gas gushes the deal lower, for low gas mineral well. The working system “three-eight” is used in the daihe mine. It produced 330d/a. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of banes; 6.The method used in coal mining; 7.Transportation of the underground; 8.The lifting of the mine; 9.The ventilation and the safety operation of the mine; 10.The basic economic and technical norms. Special part:study on top caving coal mining parameter he characteristic and the origin of soft rock roadway, the classification of soft rock and the distinction