轴承检测装置的机械CAD图纸设计.doc

摘 要 关键词：Abstract Bearing is the most basic components in all kinds of the mechanical equipment, for its accuracy, performance, life and reliability plays a very important role of the hosts accuracy, performance, life and reliability. Bearing is a high precision product in the mechanical products, not only its needs a comprehensive support for math, physics and other disciplines theory, but also needs the material science, heat treatment technology, precision machining and measuring technology, numerical control technology and numerical method is effective and powerful computer technology and other disciplines to serve its, so the bearing is the products that represents of the national scientific and technological strength. Along with the automation level of continuous improvement, the level of industrial production increasing, application field of bearing has been widely in many industries, it directly affects the quality of the work performance of machine tools, and its precision directly affects the performance of the whole device is good or bad. there are 30 percent of faculties in the rotating mechanism to be relative to bearings. so we must strictly check the qualities of bearings before they are sold .At the present in the bearing detection project, Bearing clearance detection, inner diameter measurement and vibration detection project, is an important indicator of the quality of the bearing.Weather the bearing is qualified or not,it will directly affect the bearing performance. Detection of the existing bearing tester is generally only for a single project, low detection efficiency is not convenient. In order to meet the requirements of bearing safety detection, developing a detection for higb detecting efficiency ,and the basic realization of automatic bearing detection project becomes more and more important. Key words: bearing; automation; measurement; system equipment 目 录 摘 要 III Abstract IV 目 录 V 1 绪论 1 1.1 本课题的研究内容和意义 1 1.