轴类零件工艺分析及抛光装置机械CAD图纸设计.doc

毕业设计说明书 题目名称：轴类零件工艺分析及抛光装置设计 院系名称： 班 级： 学 号： 学生姓名： 指导老师： 轴类零件工艺分析及抛光装置设计 The Analysis of Shaft Technology and the design of Buffing equipment 院系名称： 班 级： 学 号： 0 学生姓名： 指导老师： 摘要：轴类零件是机器中经常遇到的典型零件之一。它主要用来支承传动零部件，传递扭矩和承受载荷。在本文中对轴类零件从材料等各个方面对工艺做出了具体的分析，通过对轴类加工工艺的分析，对主要轴类零件的加工工艺有了基本的了解，并在本文中做出了具体的阐述。 通过国内外发展和应用的现状，阐述了砂带磨削的原理、特点及砂带机床的主要机构，。 Abstract：Machine shaft is frequently encountered one of the typical components.It is mainly used to support transmission parts, transmission torque and load to bear.This article on the shaft parts from materials made in all aspects of technology specific analysis,Shaft processing by the analysis of the main shaft of the machining process with a basic understanding of, andmade in this article specifically addressed. Through the development and application of the status of domestic and international understanding at this stage of the polishing shaft parts mostly mechanical polishing, conventional polishing carried out mainly by man, not only time consuming, inefficient, and requires operators to have to teach high skills,slightly operator errors on the machined surface will cause fatal damage, even leading to scrap the entire part, are using more than is the use of mechanical polishing wheel grinding, polishing, when the surface of high precision, the use of it is not ideal requirements.The belt polishing, and grinding wheel grinding compared to the radial resistance of small, low grinding temperature, it is not easy deformation of the workpiece surface, there have been difficult to burn, crack and other defects, has a good surface finish.In this article, the principles expounded belt grinding, abrasive belt machine features and the main body, combining the characteristics of the machine, the shaft of the poli