MPM UP2000 中文.docVIP

Page  PAGE 34 of  NUMPAGES 34 點取OK（確定）按鈕,表示要刪除程式。 點取CANCEL（取消）按鈕,表示不要刪除程式。 4. Backup System備份已存入檔案 About to BACKUP system files from: A： Press NEXT to Continue, or EXIT to Quit. About to BACKUP system files(將系統資料與程式檔案備份到A磁碟機) A： Press NEXT to Continue, or EXIT to Quit.(按NEXT繼續,按EXIT離開) 1 Disk is required for this backup. Press NEXT to Continue, or EXIT to Quit. 1 Disk is required for this backup. (需要一片磁片) Press NEXT to Continue, or EXIT to Quit. (按NEXT繼續,按EXIT離開) ※因程式檔案多寡,所需要磁片數目不同 Insert blank disk in drive A: Disk 1 Disk 1 Press NEXT to Continue, or EXIT to Quit. Insert blank disk in drive A: (插入空白磁片到A磁碟機) Disk 1 Disk 1 (磁片第一片) Press NEXT to Continue, or EXIT to Quit. (按NEXT繼續,按EXIT離開) Checking disk drive (檢查是否為空白磁片,檢查完後開始備份系統資料與程式檔案) Backup complete Press NEXT to Continue Backup complete(備份磁片完成) Press NEXT to Continue(按NEXT繼續) 5. Restore System載回備份檔案磁片 About to RESTORE system files from: A： Press NEXT to Continue, or EXIT to Quit. About to RESTORE system files from: (將A磁碟機資料備份載回到機器 A：內硬碟) Press NEXT to Continue, or EXIT to Quit. (按NEXT繼續,按EXIT離開) Insert backup disk 1 in drive A: Press NEXT to Continue, or EXIT to Quit. Insert backup disk 1 in drive A: (插入備份磁片到A:磁碟機) Press NEXT to Continue, or EXIT to Quit. (按NEXT繼續,按EXIT離開) Ready to restore system Press NEXT to Continue, or EXIT to Quit. Ready to restore system(準備開始載回備份磁片) Press NEXT to Continue, or EXIT to Quit. (按NEXT繼續,按EXIT離開) Checking backup (檢查是否為備份磁片,檢查完後開始載回備份系統資料與程式檔案) Restore complete Press NEXT to Continue. Restore complete(載回備份磁片完成) Press NEXT to Continue. (按NEXT繼續) 6. File Upload將已存入程式檔案存到磁片 程式顯示區 上、下頁捲軸棒 所選的程式 程式總數 取消 確定 Press SELECT on scroll bar to go up/down. Press NEXT on scroll bar to page up/down . Press SELECT on scroll bar to go up/down. (在捲軸棒,按SELECT上 下捲動) Press NEXT on scroll bar to page up/down . (在捲軸棒,按NEXT翻頁) 操作程序： 1.在程式顯示區找尋你所要的程式,利用捲軸棒來捲動或翻頁程式顯示區, 然後點取你所要的程式。 2.點取的程式會呈現藍色。 3.點取OK（確定）按鈕,表示要存入磁片。 4.點取CANCEL（取消）按鈕,表示不要存入磁片。 File transfer complete. 1 fil