unit 5 Conventional Machining Process.pptVIP

The cross slide is mounted on the dovetail guideways on the top of the saddle and it moved back and forth at 90°to the axis of the lathe by the cross slide lead screw. The lead screw can be hand or power activated. dovetail 燕尾槽 5.2 Turning and Lathe 横拖板安装在刀架鞍板上部的燕尾槽导轨上。它利用横拖板丝杠于车床轴线成90度夹角的方向上前后移动。丝杠可以手动或者自动驱动。 The compound rest is mounted on the cross slide and can be swiveled and clamped at any angle in a horizontal plane. The compound is typically used for cutting chamfers or tapers, but must also be used when cutting thread. The compound rest can only be fed by hand. There is no power to