参考资料--基于凌阳单片机的温度检测系统设计.docVIP

基于凌阳单片机的温度检测系统设计 摘要 温度是工业生产中最基本的参数之一，在日常生活和工业控制过程中经常需要进行温度测量，并对温度的结果进行分析，以做出相应的处理这对于提高生产效率和质量等都有重要的作用。Pt100为温度传感器，单片机SPCE061A为硬件核心元件，设计了一种具有温度初值设定、温度语音播报、温度显示、手动复位、自动修正误差等功能的新型温度检测系统。该系统结构简单、体积小、成本低、现场适应能力强、检测准确、可靠性高。 本设计主要完成了温度检测总体方案的设计；完成了系统的主控硬件流程图；完成了由电桥和差分放大电路组成的传感器电路；完成了单片机的最小系统电路、音频输出电路；完成了系统主程序的软件设计及系统初始化、A/D转换和语音处理等子程序的软件设计。 关键字：凌阳单片机；Pt100；语音播放Based on Sunplus single-chip of temperature detection system design Abstract Temperature is one of the most basic parameters in industrial production and life , in their daily lives and industrial process control, often need to measure temperature, and analyse the results of the temperature in order to make the deal, which has an important role to increase productivition efficiency and quality of life. The design uses Pt100 as the temperature sensor, uses single-chip SPCE061A as the hardware components, designed a new type of temperature detection system,while has the functions with the initial temperature set, temperature voice broadcast, temperature display, manual reset and correct the error automatically .This system structure is simple, the volume is small, the cost is low, the scene adaptiveness is strong, the examination is accurate, the reliability is high. This design has mainly completed the temperature examination overall concept design, the systems master control hardware flow chart, the sensor electric circuit which is composed of the electric bridge and the difference amplifying circuit, the monolithic integrated circuits smallest system circuit, the audio frequency output circuit, the system master routine software design and the system initialization, A/D transformation and the pronunciation processing small steelyard procedure software design. Keywords：Single-chip Sunplus，Pt100，voice broadcast 目 录摘要 I Abstract II 第一章 绪论 1 1.1 引言 1 1.2 国内外温度检测技术概述 2 1.2.1 温度检测技术简介 2 1.2.2 温度检测技术的发展 3 1.3 本设计的主要内容 4 第二章 总体方案设计 5 2.1 温度传感器设计方案选择 5 2.2 单片机选择 5 2.3 系统总体框图 6 第三章 硬件电路设计 7 3.1 基于单片机的温度采集系统 7 3.1