塑料模毕业论文--197307930.docVIP

宁波职业技术学院 标题：毕业论文正文或毕业设计方案（作品） 修改状态：01 教育质量管理体系质量记录 编号：NZQMS-QR-2014-26 生效日期：2007.9.1 接头塑料注射模具设计 摘 要 模具制造技术迅速发展，已成为现代制造技术的重要组成部分。如模具的CAD/CAM技术，模具的激光快速成型技术，模具的精密成形技术，模具的超精密加工技术。本设计介绍了塑料注射模具的设计与制造方法。该注射模采用了1模1腔的结构。 关键词：塑料；注射模具；设计 Abstract The die making technology rapidly expand, has become the modern technique of manufacture the important component. If molds CAD/CAM technology, molds laser fast formation technology, molds precise form technology, molds ultra precision sizing technology. This design introduced the plastic injects molds design and the manufacture method. This injection mold has used 1 mold 1 cavity structures. Key word: Plastic；injection mold；design 目录 摘 要·························································1 ABSTRACT·························································1 塑件的工艺分析···········································3 1.1分析塑件使用材料的种类及工艺特征························3 1.2分析塑件的结构工艺性····································4 1.3工艺性分析··············································4 第二章 初步确定型腔数目··········································4 2.1初步确定型腔数目········································4 第三章 注射机的选择············································· 5 3.1塑件体积的计算·········································· 5 3.2计算塑件的质量···········································5 3.3按注射机的最大注射量确定型腔数目·························6 3.4计算浇注系统的体积，其初步设定方案如下···················6 3.5查表文献4、2得选用CJ150NC型号注射机····················8 第四章 浇注系统的设计············································8 4.1 主流道的设计··············································9 4.2分流道的设计··············································9 4.3分型面的选择设计原则······································10 4.4浇口的设计················································11 4.5冷料穴的设计··············································12 第五章 确定主要零件结构尺寸选模架、成型零部件的设计··············12 5.1型腔、型芯工作尺寸计算·····································12 5.2模架的选择·················································14 第六章 导向机构的设计························