RD-1003S-TEXT.docVIP

目的 Purpose: 建立本部門的有關産品軟體方面設計的規範。使的軟體的設計，驗證，確認以及導入都能符合各項程式與規格的要求。其最終的目的是確保軟體設計品質和軟體性能，提升軟體發展的效率與效益，縮短軟體發展周期。 To constitute the specification of product of RD department, and make software the design, validation, approval, and guideline accord with the requirement of design specifications. The final purpose is to insure the design quality of software and capability, to improve the efficiency and benefits of software development. and to decrease software-developing period. 範圍 Scope: 凡客戶委託設計或公司自行研究開發之新産品皆可適應。 It’s adapt to each new product that customers submit to be designed or that is researched and developed by ourselves. 參考資料Reference: 3．1 SPH-QM-001 品質手冊 SPH-QM-001 Quality Manual 3．1 SPH-PCT-1001S 新產品開發管理程序 SPH-PCT-1001S New Product Develop schedule Control procedure 3．2 SPH-SAL-1001S 客戶需求處理程序 SPH-SAL-1001S Customer Requirements Processing procedure 述語定義 Terms definition: 4.1 RFQ Request For Quotation 4.2 USB Universal Serial Bus 4.3 ACPI Advanced configuration Power And Interface 4.4 HID Human Interface Device 4.5 PC/SC Personal Computer And Smart Card 4.6 WHQL Windows Hardware Quality Lab 4.7 單元測試 單模組測試,軟體編碼時進行的測試 Units test Single module testing and test in encoding 4.8 整合測試 整體測試,模組組合測試,編碼基本上完成時進行的測試. Integral test Integrated test, module combination test, test when coding is basically completed 作業程序說明 Procedure Procedure explanation: 5.1 設計與開發規劃 Design and development plan 5.1.1 所有新産品的開發設計均應在執行前進行可行性分析， Feasibility analysis should be taken before the development and design of new product. 5.1.2 PCT專案負責人召開專案啟動會議, 其內容應該包括計劃進度. 計劃進度表應該與實際開發設計的內容一致， 並隨著設計的進度而更新。 The project manager of PCT must hold to kick off meeting when project begins, and the content Should include the project schedule. Project schedule should accord with the actual development and design content, and updated with the design process 5.2 設計輸入Design Input 5.2.1 接受業務部提供有關客戶的RFQ及有關規格. RD認可並接受. 並根據其內容轉換成內部軟 体設計規格 SPH- RD-1003S-01A ，並進行設計前規劃以及所需的資料搜集。 Rece