电解法制备高铁酸钾合成研究.docVIP

  1. 1、本文档共38页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
  5. 5、该文档为VIP文档,如果想要下载,成为VIP会员后,下载免费。
  6. 6、成为VIP后,下载本文档将扣除1次下载权益。下载后,不支持退款、换文档。如有疑问请联系我们
  7. 7、成为VIP后,您将拥有八大权益,权益包括:VIP文档下载权益、阅读免打扰、文档格式转换、高级专利检索、专属身份标志、高级客服、多端互通、版权登记。
  8. 8、VIP文档为合作方或网友上传,每下载1次, 网站将根据用户上传文档的质量评分、类型等,对文档贡献者给予高额补贴、流量扶持。如果你也想贡献VIP文档。上传文档
查看更多
电解法制备高铁酸钾合成研究.doc

电解法制备高铁酸钾的合成研究 摘 要 高铁酸钾具有很强的氧化性、选择性以及环境友好特性。人们发现高铁酸钾可以作为一种高效、无毒的环境友好型多功能水处理剂;高铁酸钾具有很好的选择性,还可用于有机合成;此外,高铁酸钾还可以用作高能的“超铁”电池的电极材料。因此,高铁酸钾在以上几个领域具有很好的应用前景。但是高铁酸钾的稳定性差,制备和提纯工艺复杂,合成条件苛刻;至今尚未得到公认的成熟的生产工艺。本文主要研究直接电解法制备高铁酸钾。 研究电解法制备高铁酸钾的最佳工艺条件,研究电解质溶液的浓度、温度、电流密度、电解时间等工艺参数对高铁酸钾的产量的影响。提高NaOH的浓度可以增加高铁酸钾的产量,当浓度增加到16mol/L时,产量会下降。升高温度对高铁酸钾产量的提高非常显著,随温度升高在30℃出现高铁酸钾产量最大值,随后产量急剧下降。同样电流密度、电解时间对高铁酸钾产量的影响都是先增大再减小,中间存在一个最大值,分别为53mA/cm2,6h。 实验表明:根据对单因素实验数据进行正交实验处理得出64.2mA/cm2,14mol/LNaOH,30℃,6h为最佳的工艺参数。 关键词:固体高铁酸钾;电解合成;电流密度 Study on Electrochemical Process Preparation of Potassium Ferrate(VI) Abstract The iron VI derivation, potassium ferrate VI Fe VI has properties such as oxidizing power,selectivity, and a non-toxic by-product Fe III ,that make potassium ferrate VI an environmentally friendly oxidant for several applications. Potassium ferrate has been considered for years to treat with natural waters and wastewaters, because of its environmental friendly properties and its high efficiency. Fe VI is also a selective oxidant for a large number of organic compounds with Fe III as a by-product.Fe VI therefore has a role in greener technology for organic synthesis.Moreover,Ferrate has also been recently used in a new class of “super-iron”batteries,referred to as super-iron batteries, there use the Fe VI /Fe III system as anode material.In this paper we reported an electrochemical method generation of ferrate. Study prepared by electrolysis of potassium ferrate optimum conditions to study the concentration of electrolyte solution, temperature, current density, electrolysis time of processing parameters on the production of potassium ferrate impact. NaOH to raise the concentration of potassium can increase the output of the high-speed railway, when the increased concentration of 16mol / L, the output will be dropped. Elevated temperature on the production of potassium ferrate was significantly improved, with the temperature at 30 ℃ Ferrate high production value, followed by sharp dec

文档评论(0)

hkfgmny + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档