工业搅拌过程示例解析.pptVIP

Open :=#Enable_Valve Close :=#Close_Valve_Fulfilled Dsp_Open :=#Feed_Valve_A_Open Dsp_Closed:=#Feed_Valve_A_Closed Valve :=Feed_Valve_A Network 5 配料A的进料阀控制 AN Flow_A AN Feed_pump_A = #Close_Valve_Fulfilled CALL Valve_block Network 6 进料泵B的互锁 A EMER_STOP_off A Tank_below_max AN Drain = Enable_Motor Network 7 为配料B调用电机的FB A Feed_pump_B_start A #Enable_Motor = #Start_Fulfilled A( O Feed_pump_B_stop ON #Enable_Motor ) = #Stop_Fulfilled CALL Motor_block, DB_feed_pump_B Motor :=Feed_pump_B Start :=#Start_Fulfilled Stop :=#Stop_Fullfilled Response :=Flow_B Reset_Maint :=Reset_maint Timer_No :=T14 Reponse_Time:=S5T#7S Fault :=Feed_pump_B_fault Start_Dsp :=Feed_pump_B_on Stop_Dsp :=Feed_pump_B_off Maint :=Feed_pump_B_maint Network 8 延迟配料B的阀使能 A Feed_pump_B L S5T#1S SD T 15 AN Feed_pump_B R T 15 A T 15 = #Enable_Valve Network 9 配料B的入口阀控制 AN Flow_B AN Feed_pump_B = #Close_Valve_Fulfilled CALL Valve_block Open :=#Enable_Valve Close :=#Close_Valve_Fulfilled Dsp_Open :=#Inlet_Valve_B_Open Dsp_Closed:=#Inlet_Valve_B_Closed Valve :=Inlet_Valve_B Open :=#Enable_Valve Close :=#Close_Valve_Fulfilled Dsp_Open :=#Feed_Valve_B_Open Dsp_Closed:=#Feed_Valve_B_Closed Valve :=Feed_Valve_B Network 10 配料B的进料阀控制 AN Flow_B AN Feed_pump_B = #Close_Valve_Fulfilled CALL Valve_block Network 11 搅拌器的互锁 A EMER_STOP_off A Tank_above_min AN Drain = #Enable_Motor Network 12 为搅拌器调用电机的FB A Agitator_start A #Enable_Motor = #Start_Fulfilled A( O Agitator_stop ON #Enable_Motor ) = #Stop_Fulfilled Motor :=Agitator CALL Motor_block, DB_Agitator Start :=#Start_Fulfilled Stop :=#Stop_Fullfilled Response :=Agitator_running Reset_Maint :=Reset_maint Timer_No :=T16 Reponse_Time:=S5T#10S Fault :=Agitator_fault Start_Dsp :=Agitator_on Stop_Dsp :=Agitator_off Maint :=Agitator_maint Network 13 排料阀的互锁 A E