Module1lesson1研讨.pptxVIP

Module 1 NC Machining Technology Lesson 1 Operation Requirement for NC Machine As the NC equipment is automated and very fast so it is a In order to prevent the personnel injures and the equipment damage, operators should know about safety operation requirement for NC machine. source of hazards. Let’s try to remember the following. Operation Requirement for NC Machine 1. Keep all of the original covers on the machine as supplied by the machine tool manufacturer. 2. Wear crafty glasses, gloves, and proper clothing and shoes. 3. Do not try to run the machine before you are familiar with its operation control. 4. Before running the program, make sure that the part is clamped properly. Operation Requirement for NC Machine 5. When running a program, follow the procedures below. ⑴ Run the program by using the machine LOCK function; check for errors in syntax and geometry. ⑵ Slow down rapid motions or run dry program by using the RAPID OVERRIDE switch. Operation Requirement for NC Machine ⑶ Use a single-block run to confirm each line in the program before running it. ⑷ When the tool is cutting, slow down the feed rate by using the FEED OVERRIDE switch. Operation Requirement for NC Machine 6. Do not handle chips by hand and do not use chip hooks to straighten curled chips. Stop the machine if you need to properly clean the chips. 7. If there is any suspicion that the insert will break under the programmed cutting conditions, chooses a thicker insert or reduce the feed or the depth of the cut. Operation Requirement for NC Machine 8. Stop the machine when changing the tools, indexing the insert, and removing the chips. 9. Replace dull or broken tools or inserts . 10. Do not make changes in the program if your supervisor has prohibited your doing so. Operation Requirement for NC Machine The Advantages of CNC Machines Supplement Reading : 1. NC machines have many advantages over conventional machines, some of them are: ⑴There is a possibility of performing multiple