感应耦合式锂电池无线充电平台设计应用研究.docVIP

论文作者签名: 指导教师签名: 论文评阅人1: 马皓教授 评阅人2: 胡岩教授 评阅人3: 林平副教授 评阅人4: 评阅人5: 答辩委员会主席： 悅光正 教授 委员1: 杨仕友__教授 委员2: 章讳副教授 委员3: 林平..副教授 委员4: 李玉玲副教授 委员5: 答辩日期：2013年3月8曰浙江大学研宄生学位论文独创性声明 本人声明所呈交的学位论文是本人在导师指导下进行的研宄工作及取得的研宄成果。 除了文中特别加以标注和致谢的地方外，论文中不包含其他人己经发表或撰写过的研究成 果，也不包含为获得浙0：）（，，，，，Abstract The consumption of power is closely related to the development of human society, and has become an indispensable form of energy in people’s daily life today. With the rapid progress of power electronics technology, the transmission, distribution and use of power are also undergoing changes with each passing day. But in general, the delivery of power in worldwide is still using the traditional transmission mode, wire conduction of electrical connection. This makes the sparks, carbon deposits, mechanical wear and so on, to be inevitable. In some special occasions, such as the chemical industry, mines, underwater environment, the electrical arc will enough lead to accidents. In medical field, the artificial heart has successfully implanted. The charging in vitro of organs battery challenges the traditional power transmission, makes wireless transmission technology came into being. This paper gives in-depth study on inductively coupled wireless charging platform for multi-lithium batteries, and also builds a prototype under laboratory conditions for theory verification. This paper analyzes the circuit topology of inductively wireless power transfer system, gives detailed modeling analysis and theoretical derivation about important parts of system circuits, such as separable transformer, the compensation circuit. The separable transformer uses mutual inductance model; analyzes eight kinds of compensation methods in detail; and finally using the SS mode. In this case, the system has constant current source characteristics, and the parasitic resistance of the winding does not affect the compensation capacitor having a most simple form. Tell the relationship between AC equivalent resist