基于遗传算法的滚动轴承的多目标优化设计翻译概念.doc

Multi-objective design optimisation of rolling bearings using genetic algorithms 基于遗传算法的滚动轴承的多目标优化设计 Shantanu Guptaa Rajiv Tiwarib, and Shivashankar B. Naira, aDepartment of Computer Science and Engineering计算机科学与工程Indian Institute of Technology Guwahati, 印度理工学院 GuwahatiGuwahati 781039, Assam, India 印度阿萨姆邦，781039，GuwahatibDepartment of Mechanical Engineering 机械工程系 Indian Institute of Technology Guwahati, 印度理工学院 GuwahatiGuwahati 781039, Assam, India 印度阿萨姆邦，781039，GuwahatiReceived 8 March 2006;? revised 6 September 2006;? accepted 2 October 2006.? Available online 28 December 2006.  AbstractThe design of rolling bearings has to satisfy various constraints, e.g. the geometrical, kinematics and the strength, while delivering excellent performance, long life and high reliability. This invokes the need of an optimal design methodology to achieve these objectives collectively, i.e. the multi-objective optimisation. In this paper, three primary objectives for a rolling bearing, namely, the dynamic capacity (Cd), the static capacity (Cs) and the elastohydrodynamic minimum film thickness (Hmin) have been optimized separately, pair-wise and simultaneously using an advanced multi-objective optimisation algorithm: NSGA II (non-dominated sorting based genetic algorithm). These multiple objectives are performance measures of a rolling bearing, compete among themselves giving us a trade-off region where they become “simultaneously optimal”, i.e. Pareto optimal. A sensitivity analysis of various design parameters has been performed, to see changes in bearing performance parameters, and results show that, except the inner groove curvature radius, no other design parameters have adverse affect on performance parameters. 滚动轴承的设计，满足各种制约因素，如几何、 运动学和强度，同时还提供优异的性能、 长寿命和高可靠性。这将调用优化设计方法来实现这些目标，即目标优化。在本文中一个滚动轴承，即动态能力（CD），静态电容（Cs），最小膜厚度（HMIN）已被单独成对同时使用先进的多目标优化算法：NSGA II（非支配排序遗传算法）。他们成为“同时最优”，即帕累托最优。各种设计参数的灵敏度进行了分析，看看轴承性能参数的变化，结果表明，除内沟曲率半径，没有其他。Keywords: Rolling bearings; Multi-ob