环氧树脂清漆的用途和使用说明.docVIP

Intended Uses 用途 适用于金属保护,例如沿海地区和湿热地区的器材防护装饰,自然干燥或烘干,成膜后具有防潮性和耐油性. Suited for protecting metals, such as anti-corrosion and decration of equipments in coastal areas and humid hot regions, natural drying or stoving, it forms a film with resistance to moisture and oil. Product Information产品简介 浅黄色,由环氧树脂和固化剂按比例混合配制而成.. Light yellow, it is producted by mixing epoxy resin with curing agent according to the regulated ratio. Application details 产品数据 Volume Solids 固体份 ≥29.4% Dry Flm Thickness干膜厚度 20 microns equivalent to 68 microns wet film 20微米相当于68微米湿膜厚 Theoretical Coverage 理论涂布率 14m2 /Kg 14平方米/公斤 Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Mix Radio 混合比 A : B 3:1 by weight 甲:乙 3:1（重量比） Method of Application 施工方法 Airless Spray 无空气喷涂 Recommended 推荐采用 Brush or Roller 涂刷或辊涂 Recommended 推荐采用 Conwentional Spray 传统喷涂 Not Recommended 不推荐采用 Thinner 稀释剂 SC003 Cleaner 油漆设备清洗剂 SC003 Pot Life 使用期 25℃:6h 25℃6小时 Storage 贮存期 One year 一年 Drying time 干燥时间 Substrate Temperatur e底材温度 Touch Dry 表干 （h） Hard Dry 硬干 h） Over coating Interval 覆涂间隔 Min最短 Max最长 25℃ 4 24 24 hours 小时 7days 天 Storageand Handling 贮存与管理 Storage 贮存 Store in cool and dry conditions 贮存于阴凉干燥处 Pack size 包装规格 A;15Kg in 20 liter container 甲:15公斤装于20公升容器中 B:5Kg in 5 liter container 乙:5公斤装于5公升容器中 Flash Point 闪点 27℃ Specific Gravity 比重 Approx 1.05Kg/L 大约1.05公斤/公升 Specification and Surface preparation 技术要求及表面处理 The surface to be painted shuold be free from dust and greasy etc. 清除表面灰尘和油脂的污物。 Limitations 限制 Recommended coat: Spray two coat with high-pressure airless spray for the sake of reaching 30 microns of dryfilm thickness. 建议涂装道数：高压无空气喷涂二道，达于膜厚度30um Safety Precautions 安全措施 This product should be used in painting area by perfessional operators. When painting , please refer to Product Data Sheet and MSDS. Consult our company if consumers could not completely understand the precautions for safety and health when applying this product. This