WE-021焊缝标识工作程序.docVIP

中国核工业第五建设有限公司管理体系文件Management System Document of China Nuclear Industry Fifth Construction Co., Ltd. 编号/No.： CNF/MS OG WE-021 文件类型Document type 文件页数Page number of document 附页数Page number of attachment 版次Rev. No. 修订说明Modification statement 受控编号Controlling No. 密级Confidential OG 5 0 第五版 5th edition 适应性修改 Adaptability modification 无 Null 管道预制焊缝标识工作程序Weld Identification Procedure for Pipe Prefabrication 第五版 5th edition 第四版 4th edition 2010.10.29 2010.11.01 姚彦鹏 Yao Yanpeng 王海燕 Wang Haiyan 刘卫华 Liu Weihua 梁选翠 Liang Xuancui 第版Rev. III 2010.03.22 2010.03.24 赵绍昱 Zhao Shaoyu 王海燕Wang Haiyan 刘卫华Liu Weihua 梁选翠Liang Xuancui …… 第一版 1th edition 2009.06.23 2009.06.24 姚彦鹏 Yao Yanpeng 王海燕 Wang Haiyan 庄九成 Zhuang Jiucheng 梁选翠 Liang Xuancui 版权声明：本文件属于公司内部管理文件，未经许可，不得复制。Copyright statement: This Document belongs to the Company’s internal management document and must not be reproduced without permission. 中国核工业第五建设有限公司China Nuclear Industry Fifth Construction Co., Ltd. 目的Purpose 为规范管道预制厂管道焊缝标识方法和要求。使管道焊缝标识工作正常进行，而制定本程序。In order to normalize identification methods and requirements of pipe weld for Pipe Prefabrication Factory, and to carry out pipe weld identification smoothly, this Procedure is hereby formulated. 适用范围Applicable scope 本程序适用于管道预制厂管道预制的焊缝标识活动。 This procedure is applicable to weld marking activity in pipe prefabrication Factory. 编制依据Compilation basis 《民用核安全设备管道预制质量保证大纲》 CNF/MS NP 01-2 Quality Assurance Program of Pipe Prefabrication of Civil Nuclear Safety EquipmentCNF/MS NP 01-2 《ASME BPVC-III NB/NC/ND分卷》 1998版及2000补遗 ASME BPVC-III NB/NC/ND Sub-volume 1998 edition through 2000 addendum 《ASME/ANSI B31.1 动力管道 1989版 ASME/ANSI B31.1 Power Piping 1989 edition through1989 addendum 定义 Definitions 无Null 5．先决条件 Prerequisites 5.1 人员要求Personnel requirements 5.1.1 焊缝标识工作应由施工班组有经验的人员担任。The identification of welds shall be done by experienced personnel in the construction team. 5.1.2 焊缝标识检查工作应由质量检查人员（QC）担任。The weld identific