Yixin Modfied-Finial.docxVIP

奕瑞平板技术特点 KEY ADVANTAGES 1、High SNR Photon Sensor 高信噪比光电器件： 奕瑞的平板采用了最为成熟的非晶硅间接式X光探测技术。历经生产工艺的精心调节和产品质量的严格把关，光电器件阵列具备更好的一致性，更少的缺陷和更高的量子效率。在线性量程范围内奕瑞平板所采集图像的信噪比可以达到60dB，在同类产品中遥遥领先。 The flat panels produced by IRAY have adopted the most reliable amorphous Silicon indirect detection technology. Through precise process integration and rigid quality control, the flat panels are equipped with photo sensing matrix of better uniformity, less defects, and higher quantum efficiency. Within the linear range, the signal to noise ratio can achieve as high as 60dB, significantly higher than most competitors. 2、High speed Readout Design 高速读取设计： 优化的TFT设计，特殊的倍增读取电路，强劲的数据传输速度，使得奕瑞的平板能够迅速采集并获取图像。而静态产品曝光后瞬间即可获取全幅图像，无需预览；在特殊工作模式下，静态产品还可获得10帧/秒的速度，使得各种高端的应用成为可能。 动态产品系列可轻松获得30帧/秒的速度； With the optimal TFT design, innovative duplicate readout circuit and powerful data transmission, IRAY’s flat panels can instantly acquire full resolution x-ray images, which makes image preview unnecessary. The dynamic flat panels can easily achieve 30 frames/second; under special working modes, the static flat panels can achieve 10 frames/second which makes it feasible for various advanced applications. 3、Chip on Glass 面板芯片耦合技术: 奕瑞独家所有，新一代的COG技术(第三代)直接将关键芯片耦合到探测器面板之上，降低了电子噪声，降低了功耗，也使得结构和电子设计更加简洁紧凑，产品更为轻便。实现了平板探测器从第二代COF工艺到第三代的COG工艺的升级和突破。 Comparing to most competitors using the second generation COF technology, IRAY’s flat panels have uniquely adopted the third generation COG technology, which not only reduced the electronic noise and power consumption, but also saved space for a more compact and much lighter structural and electronic design. 4、Innovative Driving Scheme 独创驱动结构： 奕瑞独一无二的驱动结构不同于任何同类产品，这种结构减少了读取电路的数量，从而降低了功耗，同时也提高了工艺的稳定性和系统的可靠性，为进一步降低成本提供了可能。 IRAY’s flat panels are equipped with the innovative driving scheme which is different from any other similar products. The special driving scheme reduced the number of readout circuits and the power consumption, and at the same time enhanced the product’s r