xa使用中文说明.docVIP

Introduction 介绍 Congratulations on your choice of the Fixturlaser XA. We are convinced that you have made the right decision and we hope the system will meet, and even exceed your expectations. 感谢您选择Fixturlaser XA。希望本系统能满足甚至超出您的期望。 The purpose of this manual is to guide you through the different procedures and operating of the hardware and software. Since machine installations and setups are often different from each other we have focused this manual on measurement principles and how to handle the system. 本手册的目的是指导您了解系统硬件软件的操作过程。因为每台设备安装不尽相同，我们重点介绍测量原理与操作。  The manual describes applications, functions and equipment that may be available in a Fixturlaser XA system, the ones that are available in your specific system depend upon which application packages and accessories you have selected. 本手册将介绍XA系统的所有应用、功能以及设备。您是否会用到则取决于您选择的不同应用套装及附件。 If you don’t want to read manuals, please read at least the sections about safety and care before you proceed with your first measurement. 如果您不像阅读手册，请在您的测量之前至少阅读安全保护章节。 We wish you many successful measurements. 祝您测量成功！ Main Menu 主菜单 XA根据您的需要及选择的不同附件提供不同的程序。 按下红色启动按钮启动系统，主菜单会示 在主菜单中您可以找到内存管理与环境设定。 Application programs 应用程序 Shaft Alignment Horizontal Machines 水平轴对中 Shaft Alignment Vertical Machines 垂直轴对中 Shaft Alignment Offset Machines 万向节对中 Machine Train Alignment 机器链对中 Softcheck 软脚测试 Target Values 目标值预设 OL2R 冷态至热态测试 Hot Check 热膨胀 Sensor Display 读数显示 Text Editor 文本编辑 Memory Manager Memory Manager 内存管理 System functions 系统功能 Global Settings 环境设定 Battery indicator 电池电量显示 Wireless indicator Lit when wireless communication is activated.无线蓝牙显示 Backlight 背光调整 Off 关机 OFF options 关机选项 按下关机按钮后，弹出对话框会让您选择关机，睡眠还是返回 Off 关机 Sleep 休眠 Return 返回 Shaft Alignment Horizontal Machines 水平转轴对中 Introduction 介绍 轴对中：测定和调整两台连接设备，使其旋转中心共线。水平对中的调整是通过调整设备前后脚的高低和水平位移，使其达到公差允许值 XA系统有两个测量单元，分别固定在两个轴上，旋转轴到不同位置，系统会技术两轴的相对位移，并显示对中结果和调整建议。 测量结果可保存  StartING the Program 开始程序 Start the program by touching the Ho