隔爆型电接点压力表使用说明书.docVIP

隔爆型电接点压力表使用说明书 Explosion-proof Type Pressure Gauge with Electrical Contact Operational Instructions YTX-100B 隔爆型电接点压力表系按国家标准“爆炸性气体环境用电气设备”第1部分：通用要求 The Explosion-proof Type Pressure Gauge with Electrical Contact is designed according to the national standard “Electric Equipment in Explosive Gas Atmosphere”, i.e. Part I Common Requirements of GB3836.1-2000、第2部分：隔爆型“d” GB3836.2-2000的相关规定及行业标准：“电接点 GB3836.1-2000, Part II the related regulation of GB 3836.2-2000 for explosion-proof type “d” products and relative industrial standards, and JB/T9273-1999 requirements for “Pressure Gauge With Electrical Contact”. 压力表”JB/T9273-1999的要求进行设计，经国家制定的检验机构所审批的图样和技术文件 Meanwhile it is manufactured as per the approved drawing and technical documents approved by the national stated inspection institution. 进制造的。 用途 I. Purpose 隔爆型电接点压力表的防爆标志你：ExdⅡCT4（标志Ex、隔爆型d、类型ⅡC、温度 The explosion-proof marks for Explosion-proof Type Pressure Gauge with Electrical Contact are as below: ExdIIC T4 in which the Ex stands for mark, d stands for explosion-proof, IIC stands for category and T4 stands for temperature arrangement , 组别T4），适用于爆炸性气体环境中，测量温度低于70℃的介质压力。并通过电气信号装 which is applicable to the explosive gas environment with media pressure at 70 ℃ and below measured temperature. 置与具有相应防爆性能的电器件配套使用，对被测压力执行自动控制、报警、信号远传等多 The explosion-proof Type Pressure Gauge with Electrical Contact is equipped with multi functions as automatic control, alarm, signal distant transfer and other functions for the measured pressure with the help of the electric signal equipment and electrical equipment with the related explosion-proof performance for. The grade of gauge case is for IP65. 种功能,防护等级IP65。 仪表结构与防爆原理 II. Gauge Structure and Explosion-proof Principle 仪表由隔爆结构的外壳及内装电接点压力表组成。工作中，当表壳内部的可燃性混合物 The gauge is composed of explosion-proof case and build-in pressure gauge with electrical contact. When the flammable gas mix in gauge case explodes caused 因受火花或电弧（电接点压力表的电气信号装置所引起）等作用而发生爆炸时，不会引起仪 by the spark or electric arc g