DT-1300.docVIP

INSTRUCTION MANUAL Light Meter TABLET OF CONTENTS TITLE FEATURES SPECIFICATIONS PANEL DESCRIPTION OPERATING INSTRUCTION Battery Replacement FEATURES 3 –1/2digit LCD display with low battery indication. Easy to use with single function switch operating, pocket size and light weight. Light measuring levers ranging from 0.01 lux to 50,000 lux. 2000 lux: reading x 10; 50,000lux: reading x 100 SPECIFICATIONS Display: 1999 counts LCD display with low battery indication. Over-range: “1” mark indication. Low battery indication: The “BAT” is displayed when the battery voltage drops below the operating level. Measurement rate: 1.5 times per second, nominal. Storage temperature: -10℃ to 60℃ (14℉ to 140℉) at80% relative humidity Power: One standard 12V, A23 battery. Photo Detector Dimensions: 115 x 60 x 27mm Dimensions: 188 x 64.5 x 24.5mm Weight: 160g Light Measuring Range: 200, 2000, 20,000lux (20,000lux range reading x 10) and 50,000lux (50,000lux range reading x 100) Overrate Display: Highest digit of “1” is displayed. Accuracy: ?5%rdg + 10 dgts (10,000 lux) ?10%rdg + 10 dgts (10,000 lux) (calibrated to standard incandescent lam,2856 k). Repeatability:? 2%. Temperature Characteristic: ?0.1%/℃. Photo detector: One silicon photo diode with filter. 3. PANEL DESCRIPTION LCD display: 3 – 1/2digit LCD display with low battery “BAT” indication. Power / Function / Range Switch: Turn power on (or off) and select measurement function and ranges. Photo Detector: Long life silicon photo diode inside. OPERATING INSTRUCTION Measuring Light Turn the Power/function/range Switch to select the “lux” scale and set the range to desired (“lux”, “x10 lux” or x 100 lux) range. Remove the photo detector to light source in a horizontal position. Read the illuminance nominal from the LCD display. Over-range: If the instrument only display one “1” in the M.S.D. the input signal is too strong, and a higher range should be selected. When the measurement is co