S7200系列定量给料机说明书(1_TD400)_ren.docVIP

S7-200 Series quantifying proportioning ControllerS7200系列定量给料机控制仪 HANDBOOK使用说明书 Anri Huilong Electron Co., Ltd, Chuzhou滁州安瑞汇龙电子有限公司Address: Mingguang Load 200, Chuzhou city, China地址：安徽省滁州市明光路200号Tel: +86-0550-3049710Fax: +86-0550-3048017Web: 概述 summarization 本公司生产的DEL系列皮带秤是新一代块状物料计量产品。系统采用给料机喂料、计量的工作方式， 配以进口变频调速器、高精度的称重传感器和测速传感器 ，可实现准确计量、适时调节（调速范围5～50Hz）。The DEL series belt weigher made by Anri Co is new age product for measuring-calculating block material. The system adopts the mode of feeding, measuring-calculating by the weigher. Equip import inverter, high-precision weighing sensor and velocity sensor, can implement exact measuring-calculating, timing adjusting (velocity adjusting range: 5~50Hz). 控制部份采用德国西门子公司的S7200 PLC为核心，配以汉化文本显示，全中文人机界面，操作简单易学，可靠性高。The S7-200 PLC made by Siemens, Germany is adopted as the controller, Chinese text indication, Chinese HMI, operation is easy and stability is high. 工作原理块状物料经过定量给料机的皮带拖动，物料的重力作用于荷重传感器上，荷重传感器将所受力的大小转为电信号输出至PLC的模拟量输入模块，同时电机旋转的速度也通过测速传感器输出至PLC的高速脉冲测量端口，PLC通过模数转换和高速脉冲测量将重量和速度的转化为数字量，经过运算处理得出当时的瞬时流量，并根据用户设定的给定量，计算二者差值，再经PID算法，输出控制值经模拟量输出模块转换成标准电信号去控制定量给料机的变频器，改变其转速，从而最终达到给定流量与瞬时流量跟踪的最佳控制效果。The block material is transported by the belt of the weigher, the material act on the weighing sensor, the weighing sensor change the weight to electric signal and output it to the AI input module of PLC. At that time, the rotation velocity of motor is outputted to high speed pulse measure port of PLC by the velocity sensor, PLC changes the weight and velocity signal to numeral variable, via calculating, processing to get moment flow rate, and calculate the difference according to the setting from user, and then calculate the output at PID mode to output the control signal which is changed to standard electric signal by the AO module of PLC to control the inverter of the weigher, change the velocity, thus implement the moment flow rate closely follow the setting. 主要技术参数 Specification环境温度：-10℃～＋50℃；Ambien