国家建筑材料测试中心检测报告.docVIP

测试项目Items 优等品标准指标Standard index of quality product 检测结果Result 结论Conclusion 外观Appearance 表面整洁，无鼓泡，疵点，划伤，色差等缺陷Clean surface without swell,flaw.scratch and aberration 通过Pass 合格Qualified 长度Length:±3mm 0mm~+2mm 宽度Width:±2mm 0mm~+1mm 厚度Thickness:±0.2mm 0mm~+0.14mm 尺寸偏差Deviation of dimension 对角线差Deviation of diagonal:≤5mm 1mm 合格Qualified 边沿不直度Out of straight at sides:≤1mm/m 0.2mm/m 合格Qualified 翘曲度Warp:≤5mm/m 1mm/m 合格Qualified 涂层厚度Thickness of coating ≥25um 29um 平均值av.30 29u av.30 合格Qualified 光泽度偏差Deviation of luster ≤10 2.1 平均值av.28.0 2.1（av.28.0）2H 合格Qualified 铅笔硬度Hardness of pencil ≥HB 3H 合格Qualified 涂层柔韧性Toughness of coating ≤2T 2T 合格Qualified 附着力Adhesive 不次于一般Not less than Grade 1 划格法0级，圆滚线划痕法1级Squaring off method of Grade o Grade1 marking method of rolling line 合格Qualified 耐冲击性Impact strength 50Kg.cm不脱漆，无裂痕50Kg.cm Without paint off and crack 通过Pass 合格Qualified 耐沸水性Boiling water resistance 煮沸2h无变化（Boiling for 2h without change） 无变化（Unchanged） 合格Qualified 耐酸性Acid resistance 5%HCL v/v 浸渍表面24h无变化Immerse surface with 5% HCL v/v for 24h without change 无变化（Unchanged） 合格Qualified 耐碱性Alkali resistance 5%NaOH m/m 浸渍表面24h无变化Immerse surface with 5%NaOH m/m for 24h without change 无变化（Unchanged） 合格Qualified 耐油性Oil resistance 20#油浸渍表面24h无变化Immerse surface with 20# engine oil for 24h without change 无变化（Unchanged） 合格Qualified 耐溶剂性Solvent resistance 丁酮擦洗100次无变化（Clean 100times with butanone without change） 不露底Bottom unrevealed 合格Qualified 耐洗刷性Cleaning resistance ≥10000次无变化（≥10000times without change） 无变化（Unchanged） 合格Qualified 耐磨耗性Abrasion resistance ≥5L/um 5.33L/um 合格Qualified 耐沾污性Contamination resistance ≤15% 7.8% 合格Qualified 耐密度Density of resistance 规定值：±0.5kg/m Specified value: ±0.5kg/m2 Specified value: ±0.5kg/m2 5.32kg 合格Qualified 弯曲强度Bend strength ≥100Mpa ≥121Mpa 合格Qualified 弯曲弹性模量Flexuous modulus of elasticity ≥2.0×104Mpa 3.12×104Mpa 合格Qualified 贯穿阻力Through resistance ≥9.0kN 9.94kN 合格Qualified 剪切强度Cutting strength ≥28.0Mpa 32.0Mpa 合格Qual