高炉检测需要了解的参数.docVIP

ISO 9001 Blast Furnace Inspection Questionnaire 高炉检测情况问卷 PLEASE ANSWER ALL OF THE RELEVENT QUESTIONS:请回答以下所有相关问题： Background: 背景 1.1 Age of furnace? 炉龄？ 1.2 Accidents within the last 5 years? 最近5年内发生的高炉事故？ 1.3 Last re-bricking? 上次重新砌砖时间？ Next re-bricking? 计划下次砌砖时间？ Refractory Furnace Lining: 炉衬耐火材料 Type s of refractory 使用的耐火材料种类？ Dimensions of refractory s 耐火材料/砖尺寸？ 2.3 Known density of refractory s supplied by the manufacturer? 已知的由供货商提供的耐火材料密度？ 2.4 Known modulus of elasticity of refractory s supplied by the manufacturer? 已知的由供货商提供的耐火材料弹性模量？ 2.5 Full thickness of refractory layers? 炉衬耐火材料的全部厚度？ 2.6 Assumed present thickness? 目前推断的耐火材料厚度？ 2.7 Any known separation between layers? 目前已经知道是否有分层情况？ At least 3 sample bricks the most fresh of each refractory in the furnace will be needed for calibration purposes 用于校准仪器的耐火材料/砖，每种材料至少准备3块。 Drawings 图纸 All drawings of the furnace would be beneficial so that ahead of time inspectors will be familiar with the furnace. Also a testing pattern could be determined if given all the dimensions and accessibilities. 所有可以确定高炉检测点和高炉炉型的图纸 Testing 检测 What are the main objectives of this project 本次检测希望达到的主要目的？ Which area s to be tested? In what resolution? 希望检测高炉的那个部位？需要什么形式的结果？ Is it to inspect for remaining thickness, residual build-ups, or detection of defects? Or all? 希望检测剩余耐火材料厚度？残余结瘤厚度？耐火材料缺陷？还是以上内容全检测？ Any known weak spots or areas hotter than other regions? 已知的有问题的区域和哪些区域比其他区域温度高？ What are the access limitations? 高炉的那些区域没法进人测量？ What are the safety issues? 那些区域是安全测量区域。 Any particular gear is necessary to enter the site? 进入测量区域必须使用那些工具？ How long the induction and safety orientation will be? 能保证测量时高炉安全运行的时间有多长？ What are the rules concerning contractors? 合同方有什么特别的规定？ NDE-Questionnaire E C.Doc Page 2 d:\jesson\technology\ndt-bf\nde-questionnaire e c.doc ? Hatch 06/2002 d:\jesson\technology\ndt-bf\nde-questionnaire e c.doc ? Hatch 06/2002 Sheridan Science and Technology Park, 2800 Speakman Drive Missis