T3航站楼.pptVIP

北京首都国际机场T3航站楼 Beijing airport terminal 3 Beijing airport terminal 3 Design by NACO(荷兰机场顾问公司)、 British Norman foster architectural firm Building area: 132.6 million m2 Building height: 45.5 m Structure types: frame shear wall structure (框架剪力墙结构) The commencement date: On March 28, 2004 Completion date: on December 25, 2007 Unit construction: the Beijing urban construction group Co., LTD,城建 Beijing construction group Co., LTD,建工 China building eighth construction bureau Co., LTD,中建八局 The Terminal 3 is composed of T3A, T3B, T3C and a transportation center . The main terminal building T3A area is 51.5 million m2, two layer underground, five layers on the ground . T3A is the main terminal for Terminal 3 , including all domestic and international passengers using the check-in, lounge, arrival space, baggage sorting facilities, transit facilities, and for domestic passenger embarks, reach use empty lateral facilities. 3号航站楼由T3A、T3B、T3C和一座停车楼及交通中心等四个独立单元组成，主航站楼T3A建筑面积51.5万m2，地下两层，地上五层， T3A主航站楼为3号航站楼的核心，包括了所有国内和国际旅客使用的值机、候机、迎客空间、行李分检设施、中转设施，以及供国内旅客出发、到达使用的空侧设施。 T3A航站楼建筑面积达到51.5万平方米， 绑扎钢筋21万吨、 浇筑混凝土75万方、 安装玻璃幕墙14.6万平米、 钢结构安装4.2万吨。 huge quantities: area 51.5 million square meters, binding rebar 21 million tons, pouring the concrete 75 million m3, glass curtain wall 1.46 million square meters, steel structure installation 4.2 million tons, 工程难点 Engineering difficulties 地下水位高，产生浮力，为稳固建筑的20000钢椿，必须使用抗拔的. The underground water level is high, product buoyancy . To secure the building , 20,000 steel pile must use the resistance to pull. 单一的巨大屋顶： 最宽部分横跨1公里 必须考虑地震波 热胀冷缩 A single giant roof The widest part 1 km across Considering: Seismic Heat bilges cold shrink 世界上最大的行李系统：68公里传送带。 由西门子公司设计完成 The worlds largest baggage system: 68 kilometers conveyor belt Design: Siemens 长达800公尺的悬挑檐 工程进行到一半的时候，由于技术上达不到，以及舍内采光问题。挑檐从65改为35公尺 Hanging EAVES : 800 meters