- 8
- 0
- 约8.72千字
- 约 8页
- 2016-08-18 发布于河南
- 举报
PR-0000-PEN-070-0001_U00编号新
神华宁夏煤业集团有限责任公司
Shenhua Ningxia Coal Industry Group Co, Ltd
神华宁煤集团煤基烯烃项目
SNCG Ningxia Coal Based Propylene Project
一体化项目管理组
Integrated Project Management Team
中国宁夏银川
Yinchuan, Ningxia, P R China
电气编号程序
Electrical Numbering Procedure
文件编号:
Document No.
PR-0000-PEN-070-0001
U00 Issued for Use供使用 SYP 20 Jan 2008 R00 Issued for Review供审查 SYP 15 Sep 2007 发布修订
Issue Rev 发布或修改情况Issue or Revision Description 原作者
Origin by 日期
Date 审核人
Check by 日期
Date 批准人
Approved
By 日期
Date 批准人
Approved By 日期
Date 本文件持有者
This Document is Owned by
IPMT授权
IPMT Authority
目 录
1 Introduction简介 3
2 Substation Numbering变电所编号 3
2.1 110kV Main Intake Substation 110kV电网接入变电所 Error! Bookmark not defined.
2.2 35kV Power Station Substation 35kV动力站变电所 3
2.3 10kV or 6kV Substation 10kV或6kV变电所 4
2.4 0.4kV Substation 0.4kV变电所 Error! Bookmark not defined.
3 Electrical Equipment Numbering电气设备编号 4
3.1 General总则 Error! Bookmark not defined.
3.2 Electrical Equipment References电气设备类型代码 Error! Bookmark not defined.
3.3 Voltage Identification电压标识 5
3.4 Example举例说明 6
4 Electrical Cable Numbering电气电缆编号 8
4.1 General总则 Error! Bookmark not defined.
4.2 Cable Usage Identification电缆用途标识 Error! Bookmark not defined.
4.3 Example举例说明 8
Introduction简介
A common numbering system for substations, electrical equipments and electrical cables will be used across the SNCG NCPP in detail design and construction stage by all contractors. as defined in this Procedure.
在神华宁煤煤基烯烃项目详细设计和施工阶段,所有承包商均应使用本程序规定的变电所、电气设备和电气电缆通用编码程序。
After the issue of this procedure, PR-0000-PEN-010-0002(Unit, Equipment, Line Instrument Numbering Procedure) section 5(Electrical Equipment Numbering) shall be instead in detail design and construction stage.
本程序文件发布使用后,在详细设计和施工阶段,将替代PR-0000-PEN-010-0002(单元、设备、管线及仪表编码程序)第五节(电气设备编号)。
Each substation, electrical equipment and electrical cable shall h
原创力文档

文档评论(0)