参考毕业论文-模板资料解读.docVIP

无线充电器的设计 系（分院）： 专业班 级： 学生姓名： 学 号： 指导教师： 杜宝祯 年 月 日 摘 要 在这一百年无线电技术已经全世界广为流传，无线电基本使用与通信技术上。从一开始的无线电广播和无线电报，现在已经发展到卫星和微波通信，以及普及到全世界几乎每个人都有个人的移动通信、无线网络、GPS等。人们的生产和生活方式早已经被无线通信技术大大地改变了，信息化社会的目标就是依靠着无线通信实现的。可是，无线通信传送属于微弱的电信号，但不是功率较大的电能量。使得许多便携式的移动产品，都要不定期进行充电，因此许多便携式的移动产品也必须留下各种各样不同的充电插口和充电连接电缆。这样在现在许多电子产品需要的防尘防水的工艺上就很难实现全封闭，而且这种不同厂家生产的充电接口和充电器都很难得以通用。如果想彻底的去掉这些电子产品的连接线与接口，携式的移动产品就也就可以获得真正拜托充电线的束缚。也使得实现密封和防水变的容易设计。想实现这样的目标那就必须要求无线电技术也能带着电能实现无线传输。 本课题设计了无线传能充电器，是一种简单实用的无线充电器，它是将电能通过线圈以无线方式传输给LED灯或者电池，给它们进行供电。本设计的无线电能传送是由电能的发送模块和电能的接收模块两大部分组成，可以在0-5cm范围内对LED灯或者电池进行供电。并且通过单片机，AD电路测量出接收端功率，电压，电流等数据。 关键词：单片机 无线供电 线圈 Abstract In the past one hundred years has been world famous radio technology, radio communication technology and basic use. From the beginning of the radio and wireless telegraphy, has now developed to the satellite and microwave communication, and spread to almost everyone in the world have personal mobile communication, wireless network, GPS etc.. Peoples production and way of life have been greatly changed the wireless communication technology, information society is the goal of relying on wireless communication to achieve. However, the wireless communication transmission belongs to the weak signals, but the electric energy is not large power. Many portable mobile products, or regular charging, so many portable mobile products must also leave the charging socket of a variety of different and charging cable. So now many electronic products need dustproof and waterproof technology, it will be difficult to achieve full closure, and the different manufacturers of the charging interface and is very difficult to universal charger. If you want to remove the connection lines and interfaces of these electronic products completely, with mobile product you can get really please charge line. Also makes it easy to design and realize se