毕业设计（论文）-PLC控制350混凝土搅拌机--109992452.docVIP

┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 装 ┊ ┊ ┊ ┊ ┊ 订 ┊ ┊ ┊ ┊ ┊ 线 ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ ┊ 毕业设计（论文）报告纸 共 30 页 第 PAGE 30 页 PLC控制350混凝土搅拌机 物机0723 摘要 随着城市建设的快速发展，混凝土搅拌机得到广泛地应用。混凝土搅拌机属于双锥型拌筒正转搅拌，反转出料的自落式混凝土搅拌机。是建筑工地、道路、桥梁水电等工程和中小型混凝土构件厂生产的理想机械。 因为目前混凝土搅拌机工作循环的控制全部是用模拟电路来实现的，所以呢，它的自动化程度还不高、可靠性差。为了能提高混凝土搅拌机的可靠性以及进一步实现自动化，我想出了用PLC来实现对混凝土搅拌机的控制。在论文中我主要完成了以下的工作：PLC(S7-200)和混凝土搅拌机的介绍、用CAD画混凝土搅拌机的电器控制图、用CAD画出PLC的外部接线图以及顺序控制图、用STEP7-Micro/WIN编写了控制搅拌机的动作程序并成功了进行了调试，在论文的最后对混凝土搅拌机的安装、维护和保养作了介绍。 S7-200 是一种小型的可编程序控制器，适用于各行各业，各种场合中的检测、监测及控制的自动化。S7-200系列的强大功能使其无论在独立运行中，或相连成网络皆能实现复杂控制功能。因此S7-200系列具有极高的性能/价格比。因此用S7-200控制混凝土搅拌机是具有重要的现实意义。 关键词：混凝土搅拌机、PLCS70-200、S7-200控制混凝土搅拌机 Abstract With the rapid development of urban construction, concrete mixer is widely applied. Concrete mixer is double cone-type mixing tube is transferred mixing, reverse the material from falling concrete mixer. Is the construction sites, roads, bridges and other projects and small and medium hydropower plants produce concrete ideal machine. Because the current duty cycle control of concrete mixers are all achieved with analog circuits, so, it is not high degree of automation, poor reliability. In order to improve the reliability of concrete mixer and further automated, I came up with the PLC to achieve control of the concrete mixer. In the thesis I completed for the following work: PLC (S7-200) and the introduction of concrete mixer, concrete mixer with a CAD drawing of the electrical control chart, using CAD to draw the external wiring diagram and PLC sequence control chart, with STEP7- Micro / WIN prepared to control the mixers action program, the end of the paper on the concrete mixer in the installation, maintenance and maintenance are introduced. S7-200 is a small programmable logic controller, applicable to all industries, all kinds of occasions in the detection, monitoring and control automation. S7-200 series in terms of the power to operate independently, or connected into a network Jieneng complex control f