毕业设计（论文）-上海市某商务大厦空调、通风工程设计（含图纸）--115868874.docVIP

PAGE PAGE 45 图纸及计算书QQ153893706 上海市某商务大厦空调、通风设计 摘要：商务大厦集办公、会议、餐饮于一体，属商务性质。空调系统主要采用风机盘管加独立的新风系统，厨房、走道只送新风，新风处理到室内等焓线，过渡季节只供新风。配电房均采用分体式空调器。综合初投资、运行、管理费用考虑，冷热源选用大型单螺杆风冷热泵机组。为满足空气品质要求，整幢大厦的房间均设计了通风系统。地下室采用了机械送排风加诱导器系统；厨房采用全面送排风与局部排风相结合；电梯前室及楼梯间设计了正压送风系统。 关键词：风冷热泵 空气品质 诱导器系统 正压送风 Summary: The business mansion gathers to transact, meeting, dining in integral whole, belong to the business property. The air condition system main adoption breeze machine dish tube adds the independent new breeze system, the kitchen, aisle sends the new breeze only, the new breeze handles indoor etc. enthalpy line, transition of the season to send the new breeze only. Go together with to give or get an electric shock the building to all adopt the body type air condition machine of the cent. Comprehensive beginning investment, circulate, administrative expense consider, the cold and hot source chooses with the large and single screw breeze cold hot pump machine set. In order to satisfy the air quality request, the whole room of mansion all designed the well ventilated system. The ground floor adopts the machine to send to line up the breeze to add to induce the machine system; The kitchen adoption sends to line up the breeze and parts to line up the breeze to combine together completely; The elevator ex- room and stair well designed just press to send the breeze system. Keywords: Cold hot pump of breeze Air quality Induce the machine system Just press to send the breeze 目 录 1　工程概况1 2　设计依据1 2.1设计任务书1 2.2设计规范及标准1 2.3基本气象参数1 2.3.1夏季参数1 2.3.2冬季参数1 2.4室内设计参数1 2.5设计原则2 2.5.1空调设计2 2.5.2通风设计2 3 负荷计算2 3.1 冷负荷计算2 3.1.1 通过围护结构传入的热量计算3 3.1.2 过玻璃窗的日射得热引起的冷负荷3 3.1.3 人员散热引起的冷负荷4 3.1.4 3.1.5 3.1.6 食物散热冷负荷4 3.1.7 新风冷负荷4 3.2 热负荷计算4 3.2.1 围护结构得基本耗热量引起得热负荷4 3.2.2 修正基本耗热量5 3.3 湿负荷计算5 3.3.1 人体散湿量5 3.3.2 食物散湿量6 3.3.3 新风湿负荷6 3.4负荷计算结果列表6 4 空调机组选型8 4.1 风机盘管选型计算8 4.2 房间气流组织设计9 4.3 新风机组选型及管径的确定10 4.3.1 新风机组选型10 4.3.2 风管加湿器的选择11 4.3.3 风管管径的确定计算12 4.3.4 最不利管路的压力损失15 4.3 分体式空调器选型16 5 水系统